tatasta

iTrader: (24)

I am currently running the setup in my sig. Essentially, a h/c car with p&p 243s, stock bottom and TR224-112.

Looking to s/c soon and really need to know if it will work with my cam and cr (~10.5:1). Will the cam have to go and will I need to swap heads?

My other options are STS or stay NA and go to 383 or 408 with my heads.

Any advice would be appreciated.

Thanks

tatasta

iTrader: (24)

ttt..

blue00ZZleeper

iTrader: (5)

What are your goals? Power? Plan on forging later or not? Need a little more info on the car/ your plans to make good suggestions.

Bob@BruteSpeed

iTrader: (16)

Your heads and cam will work just fine with a ProCharger. Centrifical superchargers such as a ProCharger tolerate higher compression ratios very well. Stock LS2's are higher than your 10.5:1.

Take a look at the ProCharger system that I have at the link here, I have added in all the necessary piece parts that are required to go along with it, plus a lot of options at the bottom of the page. http://shop.brutespeed.com/ATI-1GJ20...F-Body-Kit.htm Bob