g'sturboss

iTrader: (1)

How much boost can the LS6 intake good for ? Looking at running 16#'s here in a few weeks . Or should I get a Vic Jr with a elbow .. Any ideas will be great .

Thanks
g

yelo04goat

iTrader: (11)

im pretty sure lots of people do it i plan on it...

there is a thread that isnt to old about the best intake for boost read through it for some good info...

westtexasbuff

iTrader: (40)

You won't have any problems running that much boost through an LS6 intake... They have been pushed way more than that.

g'sturboss

iTrader: (1)

thanks bro

AFASTYZFR1

iTrader: (55)

No problems with LS6 here

XtremeDime

iTrader: (16)

Getting real sick of seeing threads about intake manifolds.

LS1RedZ

iTrader: (19)

^^^ LOL..

No problems here with the LS6 intake at 16psi.

stevieturbo

I guess the search function is so difficult to use.


Or maybe people are just too damn lazy

2nd Gen Fl 'bird

iTrader: (13)

I can see the controversy over 40-50 hp but, arguing over 10-15 hp and the cost to achieve that is beyond me. Do a LS6 intake and be done. The heavy hitters who have deep pockets and need every last sqeeze of what they can get, damn right, get that part on the car. Otherwise, get to bed, we've got to clock in early tommorrow.

Louis at GSS

iTrader: (1)

Ive run 28 psi thru an LS6. The Block didnt hold. The intake did.

norcalauto

iTrader: (2)

a number of people have made 1000rwhp+ with an LS6 intake and boost.

Put the money elsewhere for strength/reliability instead.

98Z28CobraKiller

iTrader: (17)

Or maybe the search feature blows. You can't search for LS6 or 16# or anything else that is only 3 characters like every late model GM engine, intake, or head designation. LOL

OP, you can put a shitload of boost to an LS6. It's a solid chunk of plastic. I'd say 40 psi wouldn't hurt it.

LS1RedZ

iTrader: (19)

Yeah the search button isnt as helpful as some might think it is.

stevieturbo

I'd think if you searched "intake" there would be more than enough answers to the same questions.

Vetal

iTrader: (3)

Yesterday I thought I cracked my LS6 intake, but after reading this I guess it's not possible to do at only 9-10psi?

gnx7

iTrader: (28)

MightyMouse just went 8.49@162mph+ with his on a built motor. Street car that runs back to back mid 8's consistently. I'd say they work

stevieturbo

Anything is possible. But it is unlikely that boost pressure alone would damage the intake.

jrocstar

iTrader: (31)

i held 32psi for about 4 seconds through an ls6 with an t88. run 22psi daily no problem.

Vetal

iTrader: (3)

turned out it was just a pipe blowing away at 12 psi and then holding only 7psi so LS6 intake stays

FasTimeSS

iTrader: (47)

Been 23 with one, i know chumps who have been 25+