bpope

iTrader: (5)

Does that price include shipping?

Motovative

iTrader: (19)

No, it will be 5$ for a small Flat Rate Priority Mail box from USPS

Need_a_Camaro

iTrader: (27)

Put me down for an 8 rib. +1 for putting together some kind of kit. Or at least the part numbers for the belt and pulley for us that are too lazy to read the other thread.....

BLAKE 01 WS6

iTrader: (1)

Put me down for the 8-rib, 2.75"

Motovative

iTrader: (19)

Added you both

Motovative

iTrader: (19)

We need more buy in's !

ChevyChad

iTrader: (50)

Your belt will depend on which pulley you have on the head unit, and which size idler you use. You can get a 3" idler for $17 at autozone, or a 2.5" procharger idler for $80 from Bob at Brute Speed. I have a link in the very first post of the other thread that shows belt sizing info at the bottom of the post.

9t8z28

iTrader: (19)

I'd be in for the 6 rib and 8 rib standoff if I had a affordable source for the pulley since I am not gonna be switching to my 8 rib setup for a couple more months.

Motovative

iTrader: (19)

Have ya down for a 8-rib standoff

Need_a_Camaro

iTrader: (27)

I have the 3.42 pulley on the blower, but I'm usure of the crank pulley. Hopefully it's stamped on there, my mic doesnt go out that far.

ChevyChad

iTrader: (50)

If you have an 8 rib crank pulley, if its procharger, then its 7.65". I dont remember the size of the 6 rib procharger crank pulley.

BLAKE 01 WS6

iTrader: (1)

i have the 8 rib procharger pully and a 4.5" blower pully and plan on using the 2.5" procharger idler. what size belt will i need. I didnt see a 4.5" pulley listed in your chart? Yeah yeah its a big pulley but im on the stock shorty...haha I think its supposed to make 8lbs

ChevyChad

iTrader: (50)

I'm guessing you missed the formulas posted in that link.


For 2.5 idler: Belt Length = 1.8897 * (SC pulley diameter) + 34.579

For 3.0 idler: Belt Length = 1.9248 * (SC pulley diameter) + 34.739

So for a 4.5" SC pulley with 7.65" crank, 2.5" tensioner and 2.5" idler, you'd need something around 43.08" belt.

For a 4.5" SC pulley with 7.65" crank, 2.5" tensioner and 3.0" idler, you'd need something around 43.40" belt.

So you need something around Gates K080433, Gates K080435, or Goodyear 4080435

bpope

iTrader: (5)

Chad...what would the part# be for the 3" idler that is $17 for the 3" idler? Is it wide enough for the an 8 rib belt? Sorry...just getting confused with all of these pulley options!

Staleyp

iTrader: (4)

Im in for the 8 rib setup. Let me know when i need to send payment.

Need_a_Camaro

iTrader: (27)

Do we have to wait for 10 of each? I'm anxious to get this started.

Motovative

iTrader: (19)

No they are already in the process of being made. Expect an announcement sometime this week regarding payment and shipping.

ChevyChad

iTrader: (50)

pdasterly proved here that autozone #231107 will fit the 8 rib belt

9t8z28

iTrader: (19)

In pdasterly's pic, he has 3 different pulleys. The left one is a Procharger idler and the other two are what?

ChevyChad

iTrader: (50)

https://ls1tech.com/forums/14394676-post250.html