gsxr1k2

iTrader: (6)

Hey guys I was looking around and not finding much so I thought ask and see what other people were doing. I need a short 4" tubular muffler that will fit in my down pipe that goes out the drivers fender. Room is really tight. I know it wont help much but would like something that takes the edge off.

I did find this insert but not sure its worth it.
http://www.dynatechheaders.com/access_vortex.html

Also thought about cutting the ends off this one to fit 4".
http://www.dynatechheaders.com/access_splitflow.html

tripblackls1

iTrader: (11)

I'll upload my pics when I get home but what I did is made a u bend off of the turbo and went out the passenger side bumper, the gave me more room so I could use a decent size muffler, BTW I put a dynatech split flow in which is very similar to a borla xr1

tripblackls1

iTrader: (11)

I just noticed your link to dynatech, I'm using the 4" oval muffler

Nitroused383

iTrader: (10)

Looks like this 12" long 4" x 4" bullet fits the bill, only $27 too. It probably won't do much but should take the edge off.

http://www.schoenfeldheaders.com/mufflers.htm

gsxr1k2

iTrader: (6)

Nice find. That one may do the trick.

cracker

iTrader: (1)

http://vibrantperformance.com/catalo...1022_1032_1257

droksformula

iTrader: (18)

Some good "bullet" style mufflers are dynomax (but its not stainless), borla xr1, vibrant like mentioned, magnaflow makes one, and burns stainless tops them off but also the priciest.

bad6as

iTrader: (17)

does some thing like thoes really make a diferance?

cracker

iTrader: (1)

Yes, minimal, but it does make a difference. A lot of classes require a muffler and for some people, the vibrant is the best acceptable answer.

-Wade

Boosted One

iTrader: (6)

I'm wondering the same thing. When I went straight pipe it was too loud, so I added Borla XR-1's and it's too quiet. I'm hoping these are somewhere in beween. I'm planning on having these in my downpipes also.

52172

iTrader: (2)

Magnaflow gets my vote just a 4" in and out.... Or whatever size your downpipe is.

tripblackls1

iTrader: (11)

just to give you an idea, it was really easy and simple

tripblackls1

iTrader: (11)

how quite was the borla ? do you have a sound clip? from what i understand the splitflow is supposed to be a lil quieter, i was looking to get as quite as i could with a 4" dp consisting of less then 4ft lol

bad6as

iTrader: (17)

yeah my dp is about the same as yours, turbo is on drivers side and dp exits out the other fender.

this is mine w/o any muffler
http://www.youtube.com/results?search_query=bad6as&aq=f

tripblackls1

iTrader: (11)

seems pretty loud lol, but its really hard to judge from videos, i read that the borla is supposed to be pretty quite but all the videos i saw seem loud as well, but ill find out how quite it is soon enough, my goal is just to be able to sit at a stop light and have a cop pull next to me without me going to jail or getting my car impounded lol

Compressor Surge

iTrader: (21)

4" Dynomax bullet here

TracyRR

iTrader: (8)

I have two borla 40086 3.5" mufflers (15" core x 5" round) and although they made a big difference over no mufflers, they still have a descent amount of resonance in the car. I can idle next to a cop with no problem but won't accelerate next to him. The sound clip is below.

http://s1008.photobucket.com/albums/...t=M4H00281.mp4

bad6as

iTrader: (17)

I'm aiming for 900 ish wheel so I need a. Single muffler with single 4" inlet that flows SUPER GOOD and can't really be to big.

gsxr1k2

iTrader: (6)

Jeez i dont think my 404 is that loud with a 2' 5" dp dumped by the turbo!

Boosted One

iTrader: (6)

I just have a video of it at the track, but you can't even hear it.

http://www.youtube.com/watch?v=_7cNyr8axI0


Here it is with the straight dumps

http://www.youtube.com/watch?v=j43jg9LYKNU