Car is a 99 C5, 6 speed with 3.90 gears. I have full bolt-ons(no u/d pulley). Drivetrain consists of spec twin clutch rated for 800-1300tq, RPM Stage IV transmission, RPM stage II diff with both shafts hardened, and ECS trans/diff brace. I want a cam with decent chop that will make good power from 4000-6500rpm. I have spec'd a few cams so far...

1) 226/232 .585/.595 on 114 LSA (XER LOBES)

2) 228/234 .588/.598 on 114 LSA (XER LOBES)

3) 228/236 .588/.602 on 114 LSA (XER LOBES)

4) EPP BLOWER CAM 232/240 .595/.608

5) 236/242 .578/.592 on 115 LSA (XE LOBES)

What do you guys think will work best for me? I wanna make 550rwhp@6500rpm, and as close to 500tq as possible on 7-8lbs boost.

 

what kind of blower/motor are you running?

 

Stock cube LS1 with an ECS paxton novi 2000

 

Hands down can't go wrong with Bobs blower cams!

http://www.youtube.com/watch?v=ZMOWGdAqRkE

 

Thanks! Our camshaft has proven itself over the years to substantially increase the horsepower, while adding an awesome sound to the engine. http://shop.brutespeed.com/Comp-Brut...n-Camshaft.htm Bob