CBR F2 System First Install
TECH Fanatic
Joined: Nov 2001
Posts: 1,027
Likes: 2
From: KS
True statement. I'm working on the motor build at present. Lot's of progress. Heads are nearly done the block is close to done. Then I will order pistons. I will start a build thread soon. No doubt this kit will get the job done. There isn't any reason to think it won't. It's a pair of turbos. It will do what any twin kit will do with the available turbos. The only difference is this thing has been engineered to fit without compromising any of the comforts that the General afforded this car. The car being a 2000 WS6 6 speed with 4700 miles on the odometer.
TECH Fanatic
Joined: Nov 2001
Posts: 1,027
Likes: 2
From: KS
Yeah well we only have E85 for about 4 months then it goes to E70. So I will have to mix my own most of the time. Luckily its not difficult And the testers are not expensive. I'm not going to daily drive this so its a non issue. I mean if your making 7-800 hp how far away from home do you want to be when the transmission fails or fuel pump. I won't be able to baby it. 
This kit provides more ground clearance than Long Tube Headers.
The exhaust sound is completely dependent on how you finish the exhaust off. That car in the video had a 4" Muflex system tied into our kit. You can use what you already have, but I would recommend a NON-chamber muffler.
The exhaust sound is completely dependent on how you finish the exhaust off. That car in the video had a 4" Muflex system tied into our kit. You can use what you already have, but I would recommend a NON-chamber muffler.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo TECH Fanatic
Joined: Nov 2001
Posts: 1,027
Likes: 2
From: KS
Its a 6.0 iron block bored. 005" over, custom CP 9.8:1 pistons, custom 3.75" stroke crank, 6.200" Carrillo rods with through the rod wrist pin oilers. The heads are 317's stage 3 porting if I had to call them something. They have 2.055 intake valves 1.60 inconel exhaust. Heads flow 302 @ .500 310 @ .600. Exhaust flows 230 @ .600 no pipe and is flowing over 200 @ .400 lift so the area under peak lift on both sides is incredible. The cam is a custom Bullet 238/237 on 115. I have a FAST 90 intake. I will be running E85. As far as what I want to see I am not greedy I would like to see 800-900 at the wheels depending on boost. I should add the pistons are the only thing not in my possession.
Last edited by 2000RATA; Jan 10, 2012 at 12:42 PM.
Going to be a nice build! Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
TECH Fanatic
Joined: Nov 2001
Posts: 1,027
Likes: 2
From: KS
The machine shop called just a little bit ago (and I mean like 15 minutes). The crank and everything is balanced. I have to get it and put it all together. But I am swamped with work so it may be another month before I get started.
TECH Fanatic
Joined: Nov 2001
Posts: 1,027
Likes: 2
From: KS
Build thread here for mine with one of these kits.
https://ls1tech.com/forums/forced-induction/1557743-378-lsx-tt-trans-am-build-s-modular-cbr-twin-kit-dyno-results-video-inside.html
https://ls1tech.com/forums/forced-induction/1557743-378-lsx-tt-trans-am-build-s-modular-cbr-twin-kit-dyno-results-video-inside.html
Last edited by 2000RATA; Oct 12, 2012 at 10:08 PM.
FormerVendor
Joined: Feb 2011
Posts: 547
Likes: 1
I have a little inside info on this car.
I spoke with Jesse yesterday and he told me that his brother Adrien the owner of the car.
picked up a late model aluminum block 5.3 truck motor for the car. He told me that it going to get a cam and head studs.
Jesse and I both agree that it would nice to see a nasty 408 in the car.
I spoke with Jesse yesterday and he told me that his brother Adrien the owner of the car.
picked up a late model aluminum block 5.3 truck motor for the car. He told me that it going to get a cam and head studs.
Jesse and I both agree that it would nice to see a nasty 408 in the car.
