conversion vehicle procharged q's
Thread Starter
On The Tree
Joined: Jan 2008
Posts: 175
Likes: 0
From: Delaware
conversion vehicle procharged q's I have an ls1 with fbody accessories. I'm planning on getting the lsx procharger kit. I'm not sure about the ps pump or alternator required. Can the fbody ps pump work with a remote reservoir? If not would I have to get a vette reservoir? The alternator they list is also a vette alternator. Can I use the fbody alt or does it have to be the vette?
Thread Starter
On The Tree
Joined: Jan 2008
Posts: 175
Likes: 0
From: Delaware
ok, that's what ati had told me, i dont always take them for their word though, you would think they would know a little more about what they were selling. what are the options on the reservoir for the corvette pump? does it mount in the same location as it would on the vette? can you put the reservoir anywhere? does it have to be higher than the pump itself? also for the alternator, will the plug from the fbody harness work with the vette alternator? any other compatability issues i may run into?
http://www.procharger.com/pdf/appGuide.pdf
Take a look at page 29 and 30 (actual page numbers) in the above application guide.
In the options section on page 29 you will see part numbers for the various accessories. Also, check out the footnotes at the bottom of page 30. Bob
Take a look at page 29 and 30 (actual page numbers) in the above application guide.
In the options section on page 29 you will see part numbers for the various accessories. Also, check out the footnotes at the bottom of page 30. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
On The Tree
Joined: Jan 2010
Posts: 112
Likes: 1
From: Olathe, KS
http://www.procharger.com/pdf/appGuide.pdf
Take a look at page 29 and 30 (actual page numbers) in the above application guide.
In the options section on page 29 you will see part numbers for the various accessories. Also, check out the footnotes at the bottom of page 30. Bob
Take a look at page 29 and 30 (actual page numbers) in the above application guide.
In the options section on page 29 you will see part numbers for the various accessories. Also, check out the footnotes at the bottom of page 30. Bob
Trending Topics
Usually if you google the part numbers, you'll arrive at the newer superseded part numbers. I had to do this just yesterday for some brake caliper mounting brackets. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
On The Tree
Joined: Jan 2008
Posts: 175
Likes: 0
From: Delaware
ya i think if you go with 05 and up vette on both it should be ok right? but those numbers are no good. so what are the options with the reservoir? does it need to be from a vette? where can it be mounted? should i use the vetter reservoir tube?
Thread Starter
On The Tree
Joined: Jan 2008
Posts: 175
Likes: 0
From: Delaware
Right. I was looking for a little more input than that. If there is something that will just bolt up with all factory parts it would save me time. I don't want to reinvent the wheel if I don't have to. So I was wondering if the vette reservoir, tube, and reservoir bracket would work with the lsx procharger kit.
Thread Starter
On The Tree
Joined: Jan 2008
Posts: 175
Likes: 0
From: Delaware
i'm sure someone has already tackled this problem before. so i'd like to know how other people have done this. i'm not the most experienced builder by any means, but i can read, so if the question sounds too simple, it's b/c i dont have alot of experience building cars. any help will be greatly appreciated.
Look for a PS can from a late model astro van they are remote and will work with the corvette pump or you can use an aftermarket can and braided lines if you have the cash. You can mount either anywhere you want.
As for the accessories you have to use the late model corvette ps pump and alternator I am running the LSX transplant kit as well.
As for the accessories you have to use the late model corvette ps pump and alternator I am running the LSX transplant kit as well.
Thread Starter
On The Tree
Joined: Jan 2008
Posts: 175
Likes: 0
From: Delaware
i dont know why i didnt think to ask before, but is the a.c compressor listed by procharger an f body compressor and bracket or something different? i thought the compressor was on its own seperate belt with the LSX transplant? The picture makes it look like it wouldnt really matter which compressor and bracket was used, but i just wanted to make sure. and as usual the part #'s supplied in the literature are no good, i tried to google also.
Thread Starter
On The Tree
Joined: Jan 2008
Posts: 175
Likes: 0
From: Delaware
thanks. i already notched my frame for that compressor actually so its a good thing i can actually use it with the procharger. i have to notch a little more though. i got the compressor block from doc's blocks, his block is a little thicker than the stock block, but the hoses point in the right direction for me. thanks again.
.jpg)
Hopefully this helps you out. Bob
AC Delco 25960709 - Power Steering Pump
GM 25888970 - 145Amp Alternator 2005 - 2008 Corvette (& Z06)
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website