Forged LS3 Twin PT66 Trans Am Build
11-24-2011, 01:06 AM
#63
Been working on converting over the TR6060 to work in my heap. Pretty much done, just need to cut the mainshaft. Here's the thread if you all want to follow along:
https://ls1tech.com/forums/manual-tr...body-pics.html
Got the rear end finally all put together, will have it in the car here soon. It's a moser fab 9 with their back brace, and a strange aluminum center with 3.50s and a spool:
https://ls1tech.com/forums/manual-tr...body-pics.html
Got the rear end finally all put together, will have it in the car here soon. It's a moser fab 9 with their back brace, and a strange aluminum center with 3.50s and a spool:
11-24-2011, 02:47 AM
#64
Staging Lane
Join Date: Jun 2011
Location: Australia
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
11-26-2011, 06:07 PM
#66
Hello, My name is Jordan. I lurk this website for the purpose of gaining knowledge- threads like this teach me that to which I can only aspire.
I was browsing this night, and I came across something that forced me to register (I had registered previously about 7 years ago but I guess its gone) and post here, now.
I read this:
"31x12x4 Ebay intercooler"
Do not run any Ebay Intercooler on this build, please. They are cheap for a reason. If this was a supra I would say go with an HKS or greddy core- as it were, I am thinking Spearco or any high quality name brand. Just not a generic Ebay core- those things are great for budget builds, and yours is not a budget build!
I was browsing this night, and I came across something that forced me to register (I had registered previously about 7 years ago but I guess its gone) and post here, now.
I read this:
"31x12x4 Ebay intercooler"
Do not run any Ebay Intercooler on this build, please. They are cheap for a reason. If this was a supra I would say go with an HKS or greddy core- as it were, I am thinking Spearco or any high quality name brand. Just not a generic Ebay core- those things are great for budget builds, and yours is not a budget build!
11-26-2011, 10:38 PM
#67
^^^ I've since changed my mind (again) and sold the turbo headers and ebay intercooler that was setup for a single turbo. I am going twins now, and will be building a bell core intercooler like I originally had intended.
Anyways...
Started on the motor!
Getting crank cleaned for polishing:
filing the rings
Transmission is done,feels so smooth through the gears...
Got the rear in and it's finally a roller!
Anyways...
Started on the motor!
Getting crank cleaned for polishing:
filing the rings
Transmission is done,feels so smooth through the gears...
Got the rear in and it's finally a roller!
