TVS2300 With a Twist! Flywheel dyno results attached.
#21
The original thread starter now manufactures and sales them with great success. They have proven time and time again to gain additional power.
Look up RDS Blower Plate for more info you will find several threads over various forums about the Phenolic Spacer he manufactures
Look up RDS Blower Plate for more info you will find several threads over various forums about the Phenolic Spacer he manufactures
#22
makes children cry
iTrader: (5)
the LSA blowers have a different design than what this plate was made for. the top houses the intercooler while the spacers & cathedral adapters made for those go between the manifold & the heads.
this plate is for the top-down style TVS blowers where the lower plenum houses the intercooler & they're sandwiched pretty tight together. this widens the gap between the intercooler & the manifold floor.
this plate is for the top-down style TVS blowers where the lower plenum houses the intercooler & they're sandwiched pretty tight together. this widens the gap between the intercooler & the manifold floor.
Last edited by _zebra; 09-25-2018 at 12:55 PM.
#25
makes children cry
iTrader: (5)
the LSA blowers have a different design than what this plate was made for. they have 2 intercoolers in the lid & the spacers & cathedral adapters made for those go between the manifold & the heads.
this plate is for the top-down style TVS blowers where the lower plenum houses a single intercooler & is sandwiched pretty tight together.
this plate is for the top-down style TVS blowers where the lower plenum houses a single intercooler & is sandwiched pretty tight together.
the Heartbeat style has the 2 bricks in the sides of the lid. LS9 & LSA have 1 above the rotors.
i'll fix the post above.