badazz99ss

iTrader: (16)

hey wussup guys what other brands of intercoolers is there besides griffin that are good to use. Looking for one for my turbo build in my sig.

Nitroused383

iTrader: (10)

Spearco, Bell, Precision, Treadstone, CRX racing, Garrett and Chiseled are what I know of off the top of my head.

badazz99ss

iTrader: (16)

thanks. I was looking at one from cxracing 31x12x4 would this be ok to get. It doesnt say anything about the horsepower rating tho.

dudeman

iTrader: (43)

i ran one of the cxracing i/c's. they are not bad for the price. at the track iats would start around 100 and end at 140. once i installed a meth kit iats would go as low as 70. recently in 100* ambient temps iats would be in the 90s with meth.

JRENIGAR

iTrader: (37)

Nice... What kit and how much boost??? This is my next mod.

dudeman

iTrader: (43)

alky control kit. i run 100% meth.

i was running 19-20psi.

evo462

iTrader: (27)

That's the one I'm running (and many others), and it should be sufficient for the majority of power levels.

To give you an idea of size/fitment...this is with a bracket I made.

badazz99ss

iTrader: (16)

Evo462is that the cxr intercooler. Did u have to make the bracket. And thanks again for the hotside kit.

evo462

iTrader: (27)

Yes, that's the 31x12x4 CXRacing intercooler. I made the bracket myself using 1x1" square tube and bar stock.

badazz99ss

iTrader: (16)

Ok cool sounds good. What are u using for the cold side piping

Tally TransAm

iTrader: (17)

same cx racing. im right around 600 rwhp, ill see about a 15-20 degree rise in temps at the end of a full pass on a 90 degree day, im satisfied

badazz99ss

iTrader: (16)

Well i think im going to pull the trigger on that intercooler. Now is that 15 to 20 degree temp rise with u using meth or no meth

Tally TransAm

iTrader: (17)

i dont run meth

badazz99ss

iTrader: (16)

Gotcha.

Pocket

iTrader: (22)

CXracing here too

Hotlapping my IATs are only about 10-20* over ambient with my heatpump

bwy23

iTrader: (19)

Tally, is your intercooler part number IC0023 on cx's website? I like that setup with the square tubing.