News on ASP Cog Setup
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
News on ASP Cog Setup Does anyone have any numbers yet? Jer, any dyno numbers yet? Bos, did you get yours installed yet? Any fitment issues? I plan on ordering mine very soon within the next couple of weeks. Im just starting a new thread since the other one was getting so long.
Kyle
Kyle
TECH Senior Member
Joined: Nov 2001
Posts: 11,603
Likes: 0
From: Chi-Town, IL
Jeremy has been quiet these past few days.....
I'm waiting on my mototron 60# injectors, and I'm going to throw the car on a lift thursday night and at least get the cog crank pulley put on and set......any suggestions for how much I should TQ the crank bolt to?
Going to place the blower in there put the blower pulley on, put the belt on, I pmed Jeremy to get exact details on what he did with the upside down mounting of that idler pulley, I can't picture in my mind how thats working......
I'm going to do my best to get everything alinged w/the spacers ASP provided, run the car at idle with the 1" of belt play tension and see how it does, maybe take it for a little spin......just to make sure the belt isn't going to walk off crazy style......
Anyone have a pic of how the pins on the crank pulley sit in the stock crank pulley?
I'm waiting on my mototron 60# injectors, and I'm going to throw the car on a lift thursday night and at least get the cog crank pulley put on and set......any suggestions for how much I should TQ the crank bolt to?
Going to place the blower in there put the blower pulley on, put the belt on, I pmed Jeremy to get exact details on what he did with the upside down mounting of that idler pulley, I can't picture in my mind how thats working......
I'm going to do my best to get everything alinged w/the spacers ASP provided, run the car at idle with the 1" of belt play tension and see how it does, maybe take it for a little spin......just to make sure the belt isn't going to walk off crazy style......
Anyone have a pic of how the pins on the crank pulley sit in the stock crank pulley?
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
Originally Posted by BIGBOS
Jeremy has been quiet these past few days.....
I'm waiting on my mototron 60# injectors, and I'm going to throw the car on a lift thursday night and at least get the cog crank pulley put on and set......any suggestions for how much I should TQ the crank bolt to?
Going to place the blower in there put the blower pulley on, put the belt on, I pmed Jeremy to get exact details on what he did with the upside down mounting of that idler pulley, I can't picture in my mind how thats working......
I'm going to do my best to get everything alinged w/the spacers ASP provided, run the car at idle with the 1" of belt play tension and see how it does, maybe take it for a little spin......just to make sure the belt isn't going to walk off crazy style......
Anyone have a pic of how the pins on the crank pulley sit in the stock crank pulley?
I'm waiting on my mototron 60# injectors, and I'm going to throw the car on a lift thursday night and at least get the cog crank pulley put on and set......any suggestions for how much I should TQ the crank bolt to?
Going to place the blower in there put the blower pulley on, put the belt on, I pmed Jeremy to get exact details on what he did with the upside down mounting of that idler pulley, I can't picture in my mind how thats working......
I'm going to do my best to get everything alinged w/the spacers ASP provided, run the car at idle with the 1" of belt play tension and see how it does, maybe take it for a little spin......just to make sure the belt isn't going to walk off crazy style......
Anyone have a pic of how the pins on the crank pulley sit in the stock crank pulley?
I will be ordering my 60#ers here on the 15th and have mu stock tank sumped and run all my lines and install my 420L pump. I am going to TQ my pulley to 250ftlb's and see how it goes from there. I had my crank pinned when i ordered my new motor. I pick it up next weekend and start putting the car back togeather. Take pics and remember what all you do because im right behind you......
Kyle
I'm still waiting on the steel bracket. 
But I have installed the crank pulley to 250 ft lbs and installed the idler on it's shaft and installed the supercharger pulley. Bracket was to have shipped on the 15th but I still don't have it. I have got my new APE heads,comp r lifters,yellow terra rockers, and new cam installed. 
Hey Nasty
MotoTron will give you a better deal if you oder more than one set at a time. Myself,BigBos,TwinTurboCE, and another local guy ordered ours together and they knocked off $104 a set which made them less than $420 shipped. The only thing they want is all sets shipped to one address and one credit card. Worked out great for us, heck they were cheaper than the #50's I bought two years ago. So get a couple buddies to go in with you and save money for more mods.
Tom
But I have installed the crank pulley to 250 ft lbs and installed the idler on it's shaft and installed the supercharger pulley. Bracket was to have shipped on the 15th but I still don't have it. I have got my new APE heads,comp r lifters,yellow terra rockers, and new cam installed. Hey Nasty
MotoTron will give you a better deal if you oder more than one set at a time. Myself,BigBos,TwinTurboCE, and another local guy ordered ours together and they knocked off $104 a set which made them less than $420 shipped.
The only thing they want is all sets shipped to one address and one credit card. Worked out great for us, heck they were cheaper than the #50's I bought two years ago. So get a couple buddies to go in with you and save money for more mods. Tom
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
Originally Posted by nbm00ws6
I'm still waiting on the steel bracket. But I have installed the crank pulley to 250 ft lbs and installed the idler on it's shaft and installed the supercharger pulley. Bracket was to have shipped on the 15th but I still don't have it. I have got my new APE heads,comp r lifters,yellow terra rockers, and new cam installed.
Hey Nasty
MotoTron will give you a better deal if you oder more than one set at a time. Myself,BigBos,TwinTurboCE, and another local guy ordered ours together and they knocked off $104 a set which made them less than $420 shipped. The only thing they want is all sets shipped to one address and one credit card. Worked out great for us, heck they were cheaper than the #50's I bought two years ago. So get a couple buddies to go in with you and save money for more mods.
Tom
But I have installed the crank pulley to 250 ft lbs and installed the idler on it's shaft and installed the supercharger pulley. Bracket was to have shipped on the 15th but I still don't have it. I have got my new APE heads,comp r lifters,yellow terra rockers, and new cam installed. Hey Nasty
MotoTron will give you a better deal if you oder more than one set at a time. Myself,BigBos,TwinTurboCE, and another local guy ordered ours together and they knocked off $104 a set which made them less than $420 shipped.
The only thing they want is all sets shipped to one address and one credit card. Worked out great for us, heck they were cheaper than the #50's I bought two years ago. So get a couple buddies to go in with you and save money for more mods. Tom
Jer, You still alive......... any news.
Kyle
TECH Senior Member
Joined: Nov 2001
Posts: 11,603
Likes: 0
From: Chi-Town, IL
Yea, we got those for a good deal......you should of jumped in........I'm sure someone else will be looking for a big high impedance......
Kyle, I'll take pics of everything from all different angles for sure.......I hope sikoras bracket support fits in ok with the spacing set for ASP's setup....I think it should, if it doesn't I will have it re adjusted.....
I just want to hear the sound of the blower again instead of my noisy *** spal fan....
Kyle, I'll take pics of everything from all different angles for sure.......I hope sikoras bracket support fits in ok with the spacing set for ASP's setup....I think it should, if it doesn't I will have it re adjusted.....
I just want to hear the sound of the blower again instead of my noisy *** spal fan....
