Want to make your own remote mount turbo kit?
03-05-2004, 12:08 PM
#1
TECH Veteran
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Simi Valley, CA
Posts: 4,712
Likes: 0
Received 0 Likes
on
0 Posts
Want to make your own remote mount turbo kit? I was planning on throwing a kit together for my truck, but got a good deal on a supercharger for my Corvette so that has most of my attention now. Here is what I've got:
Turbonetics T60 turbo, 4 bolt flange, just rebuilt (should support 475rwhp+).
New K&N cone filter
Oil feed line
flowmaster 2 1/4" to 2.5" ypipe, and 2 1/4" ubend pipe (to make the exhaust part)
ATI surge valve (needs a new vacuum fitting tapped in).
Email me and we'll talk if you're interested, I'll let the stuff go pretty cheap.
Turbonetics T60 turbo, 4 bolt flange, just rebuilt (should support 475rwhp+).
New K&N cone filter
Oil feed line
flowmaster 2 1/4" to 2.5" ypipe, and 2 1/4" ubend pipe (to make the exhaust part)
ATI surge valve (needs a new vacuum fitting tapped in).
Email me and we'll talk if you're interested, I'll let the stuff go pretty cheap.
