dudeman

iTrader: (43)

anyone making 1200+ with this intake? any issue or know problems? i havent seen alot of reviews on this intake. anyone have any info?

NemeSS

iTrader: (127)

I dont even think its even for sale yet.. Or at all..
Street warrior??? Again

dudeman

iTrader: (43)

http://www.holley.com/300-116.asp

its advertised for sale.

it will be street driven...

caMnaro

iTrader: (24)

https://ls1tech.com/forums/drag-raci...peed-dyno.html

dudeman

iTrader: (43)

someone has to be using this

Shawn @ VA Speed

iTrader: (3)

we did some easy pulls on the engine using this intake until we ran into supercharger drive issues. Anyway at 6000 rpm and 12 lbs of boost we made 800hp. the egt's were pretty even at that level. Once we turn this engine up, it will easlily make 1200hp. Then intake seems to be a pretty good piece.

dudeman

iTrader: (43)

good deal, i'd like to know how it goes when you turn it up.

98Z28CobraKiller

iTrader: (17)

Shawn, does it look lazy down low or do the runners seem long enough to support decent power under the curve?

Shawn @ VA Speed

iTrader: (3)

it's really hard for me to tell on this engine-it's an 8500 rpm engine plus it's a pretty short stroke. But it is making pretty good power at 5000rpm.

98Z28CobraKiller

iTrader: (17)

Thanks for the info.

bad6as

iTrader: (17)

blows ***** i cant use this on ls1 style heads, i know im choking on my stock tb and ls6 im

Shawn @ VA Speed

iTrader: (3)

our engine is a cathedral port engine. It just took "a little" work to make it work.

bad6as

iTrader: (17)

well shawn, whats the price on one? ill need a throttle body too, and i guess ill need new rails as my fast i dont think bolt up. or would a edelbrock pro-flow or a fast be a better bang for buck option

tim99ws6

iTrader: (31)

Mine is in the mail right now. We are dumping the Vic Jr and elbow in favor of this.


Shawn-->what TB do you recommend or have tested with?


I'm pumped to go to the new intake. Everything i've seen on it seems to be a big step forward for us! Will be running their rails, intake and some type of 102mm tb.

Car will see anywhere from 20-25psi on a 408ci.