LSX 427 radial RX3
#44
7 Second Club
Thread Starter
Join Date: Jan 2007
Location: Sydney
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
#46
7 Second Club
Thread Starter
Join Date: Jan 2007
Location: Sydney
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yeh that was a while back now.. it broke the drive on the oil pump on that run, so we pulled the motor down and checked it out, while it was apart but some bigger rods in it and changed the turbos to a pair of GTX4788's
just doing fab work now should be back at the track shortly.
just doing fab work now should be back at the track shortly.
#53
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ill never complain about packaging again. Very nice work. gives a new meaning to 10lbs of **** in a 5lb bag. It looks like a primary manifold tube on the left (right in picture) goes behind the strut tower sheet metal.