9sec 402ci/s400 Station Wagon
#21
We have a friend that buys cars here and ships them to his home(New Zealand) to be sold. He has to have them converted to right side drive though. Not sure if that has to happen here.
#22
Our crash test standards make it hard ( expensive) to bring in a modern non compliant vehicle. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#23
Hey mate,
Sorry if I offended you by posting your car here.
I was just showing our friends across the Pacific the calibre of cars kicking around in Oz.
Yours is the best example of a wagon in the country,I also posted several other vehicles as you would have seen.
If you would like the thread removed I will organise a moderator to do so.
Cheers.
Sorry if I offended you by posting your car here.
I was just showing our friends across the Pacific the calibre of cars kicking around in Oz.
Yours is the best example of a wagon in the country,I also posted several other vehicles as you would have seen.
If you would like the thread removed I will organise a moderator to do so.
Cheers.
#24
hi thanks for all the comments guessing this type of wagon shape would be a little new to you guys it,s a 2002 model vx berlina s2 which is basically the top of the range for a wagon!!! shitloads of them made but not that many with ls1s!!! used this to carry my carpentry tools in the back for years!!!haha here,s one of my most liked pics at drags!!! lost all street pics recently!!! anyway looking forward to the bigger s488 turbo and more boost!!!!cheers
#25
#26
#28
#31
no mate drive there and normally drive home!!!! up to about 6 or 7 tow trucks home from the drags!!!! blown autos diffs cv shafts t/shaft unis etc!!! new carbon fibre 1 piece shaft and stubs and cv shafts have been ordered as has the bigger s400 hp-88mm turbo waiting on them to arrive from states!!! anyway here,s some pics in street trim driven all the time!!!! cheers
#33
hi just an update !!! fitted new 1400hp cv shafts and axle stubs !!!one peice carbon fibre tailshaft !!! few decisions made!!! new afr 230 cc heads ,arp head studs, and switching to e85 so either a 3rd walbro or 2 bigger ones for the surge tank, 1600 cc or id2000 injectors all to go with new s400 hp-88mm turbo that just arrived from the states!!! aiming to run around 20psi!!!!???cheeers
#37
hi dont want to speculate about power figures but many that i,ve researched with similar combos have made some impressive numbers!!! hopefully more than before!!! haha!!! purchased turbo from sponsor here forced inductions!!!!cheers