Jusy bout a set of 317 heads ported and polished off a lq4 nv been on the motor since polished so that's good but my questions are what springs pushrods rocker arms and everything should I run they are going on a ls1 346 will my spring and everything work on them or no? Lmk thanks guys

 

i run patriot dual, comp push rods and stock rockers.

 

I ran Thunder racing pushrods, and then swtiched to comp. Stock length is what you need as long as you are not milling your head and stuff. Patriot gold springs are good for up to 0.600 lift cam, and stock rockers will do just fine for ya.

 

My cam is like .595 lift I believe and where to go to order all this...I already have pacsun spring for my ls1 heads will those work or do I need different ones and what's the length of the pushrods for the 317's?

 

check the length after you have everything installed, not all heads are identical in size..

There is diffrences in all of them

 

Got yea well I'll check it out what about valve springs can I use my current ones on my ld1 heads

 

whats the max lift on your springs?

 

Ummm good questions I would have to chek lol

 

.600 or .650 I'll have to check for sire