eBay turbo kit
#2
TECH Apprentice
iTrader: (7)
I bought the ebay knock off PTK, Used a garrett GT76mm .96 A/R and currently have ran a best of 6.35 in the 1/8th my time is on the 2012 boosted 1/8 FI that time is equivalent to high 9 second 1/4 mile pass. If you have any questions I have a thread on here with some pics and I discussed how to install it. There are a few issues with the driver side manifold bolt holes nothing a big drill bit wont fix in 30 seconds and you have to relocate the passenger 02 bung what I did was plug it, plugs come with the kit, and weld a new bung on lower, there like two dollars at NAPA. You can also PM me if your stuck. Hopefully this answers your question.
Trending Topics
#8
TECH Regular
iTrader: (1)
Join Date: Aug 2007
Location: Lake Jackson TX, south of Houston
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
i had to mod mine alot just to get it to fit, so unless you have a tig, and in that case i would just do the truck maniflods. Maybe i was just unlucky but its a POS.
#9
On The Tree
iTrader: (8)
Join Date: Nov 2009
Location: FT. Sill Oklahoma
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
has anyone tried this kit? i plan on using it for my 86 ta lq4 swap so i plan on having to mod the hell out of it anyway, i just figured it was the cheaper way of getting the turbo where i want it with out having to build a hole custom system.. but was just wondering if anyone had tried this one..
http://www.ebay.com/itm/97-02-Chevy-...057004&vxp=mtr
http://www.ebay.com/itm/97-02-Chevy-...057004&vxp=mtr
#10
TECH Fanatic
iTrader: (11)
has anyone tried this kit? i plan on using it for my 86 ta lq4 swap so i plan on having to mod the hell out of it anyway, i just figured it was the cheaper way of getting the turbo where i want it with out having to build a hole custom system.. but was just wondering if anyone had tried this one..
http://www.ebay.com/itm/97-02-Chevy-...057004&vxp=mtr
http://www.ebay.com/itm/97-02-Chevy-...057004&vxp=mtr