Fireball Twin Turbo Third Gen Camaro Build thread
#66
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Discussed the engine with shawn last night...More or less finalized the engine setup...no changes from what I said earlier...
427 RHS-based motor
Diamond billet pistons
change to steel rods
Trickflow 245 6-bolt heads
T&D rockers
keep solid roller setup (change to smaller cam though)
10:1 compression (new heads are same chamber CC as old heads)
Pro-Flo intake
should be a bad little b^tch
427 RHS-based motor
Diamond billet pistons
change to steel rods
Trickflow 245 6-bolt heads
T&D rockers
keep solid roller setup (change to smaller cam though)
10:1 compression (new heads are same chamber CC as old heads)
Pro-Flo intake
should be a bad little b^tch
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
#70
10 Second Club
iTrader: (2)
Join Date: Sep 2006
Location: Fort Wayne, IN
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hmmm...wolfe minitubs fit pretty well from what I read on thirdgen.org
Looks like I may go with a BMR k-member with LS1 mounts and a pinto steering setup (manual steering)
QA1 double adjustable struts up front (coil over)
AFCO DA shocks in the back
probably will roll on a 275/60/15 drag radial tire
will probably custom build my own moly cage...
Looks like I may go with a BMR k-member with LS1 mounts and a pinto steering setup (manual steering)
QA1 double adjustable struts up front (coil over)
AFCO DA shocks in the back
probably will roll on a 275/60/15 drag radial tire
will probably custom build my own moly cage...
#72
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hmmm...very interesting for the instrument cluster....has options that also allow incorporation of boost and fuel pressure right in the driver information center...
![](http://www.dakotadigital.com/cartimages/prd_zm_168.gif)