Just Another JY 5.3 Build......
Intercooler piping showed up, threw a few ideas around and came up with this:
I might have a buddy of mine weld up most of the piping as i hate couplers!
Im hoping to have her out and driving in about in 2 weeks, this weekend im going to get the trans cooler/lines all done as well as some other small things....
I might have a buddy of mine weld up most of the piping as i hate couplers!
Im hoping to have her out and driving in about in 2 weeks, this weekend im going to get the trans cooler/lines all done as well as some other small things....
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Lol, Steve that's my fathers car and yea its your twin!
It's an 02, the only difference is he has an SS hood, I still have to finish pulling that car apart as well!
It's an 02, the only difference is he has an SS hood, I still have to finish pulling that car apart as well!
Cool, there's a local pinhead that was trying to sell a GM SS hood in pewter, but he quit txtn me, and I got cash, oh well, maybe be I'll put a sunoco on it later, what are you doing to dads car,
Not much really to update again, but some things have came in!
Got my trans cooler mounted and all the fittings, still need to have the lines done!
Also have the shifter/cable finally mounted and finished!
I didnt like the way the intercooler piping was done so i switched it up a bit as well!
Things left to do (should have most done by this weekend)
Lengthen driveshaft
Tranny cooler lines
Get belt
Order fans
Order trans dipstick
Pics:
Got my trans cooler mounted and all the fittings, still need to have the lines done!
Also have the shifter/cable finally mounted and finished!
I didnt like the way the intercooler piping was done so i switched it up a bit as well!
Things left to do (should have most done by this weekend)
Lengthen driveshaft
Tranny cooler lines
Get belt
Order fans
Order trans dipstick
Pics:
Thanks spinya!
I got the new driveshaft picked up and installed, finishing these trans cooler line's and i also picked up a dipstick and getting a belt this weekend, all thats needed after that is to order fans and get her tuned!
Car is 95% done....
I got the new driveshaft picked up and installed, finishing these trans cooler line's and i also picked up a dipstick and getting a belt this weekend, all thats needed after that is to order fans and get her tuned!
Car is 95% done....
Staging Lane
Joined: May 2012
Posts: 96
Likes: 0
From: austin, tx
Well it finally moved on it's own power after 6 months!
http://www.youtube.com/watch?v=v2n3L...1&feature=plcp
http://www.youtube.com/watch?v=v2n3L...1&feature=plcp
Tuner is coming over on sat. to get the car to idle and lean it out since its running PIG rich!
I also put a 7lb spring in the gate, gonna see what she puts down on that boost then turn it up once I get used to the car.....
I also put a 7lb spring in the gate, gonna see what she puts down on that boost then turn it up once I get used to the car.....
TECH Enthusiast
Joined: Mar 2010
Posts: 519
Likes: 2
I like this build especially since ur using that on3 turbo. I want to use it in my rear mount setup that is currently a t6 76mm midframe garrett.
Gonna try to acheive some more boost down low.
Looking forward to numbers
Gonna try to acheive some more boost down low.
Looking forward to numbers