TurboTech wastegate question
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: May 2002
Posts: 642
Likes: 0
From: Nashville, TN
TurboTech wastegate question I'm upgrading in this kit. Ditching the intercooler and getting a Griffin, 3 in. downpipe, and T76 turbo. I was thinking about getting the Tial 38mm wastegate to replace the crappy deltagate that came with this kit. The flange looks the same, will it bolt on? 
if it has a bigger valve or required tube then my guess would be no
reason your switching this out is you want better flow right.
i could be wrong though as i dont know for sure.
reason your switching this out is you want better flow right.
i could be wrong though as i dont know for sure.
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: May 2002
Posts: 642
Likes: 0
From: Nashville, TN
Originally Posted by 69firebird
would you be interested in selling your old wastegate?
ed
ed
i was getting about a 2-3psi spike, didnt last long, but neither how long it took to get to redline.
never got any knock with the spike either.
i definatly need a new wastegate, but my funds are always tied up with something else.
i might even try two delta gates if i could get on cheap cheap.
never got any knock with the spike either.
i definatly need a new wastegate, but my funds are always tied up with something else.
i might even try two delta gates if i could get on cheap cheap.
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: May 2002
Posts: 642
Likes: 0
From: Nashville, TN
Originally Posted by smokinHawk
i was getting about a 2-3psi spike, didnt last long, but neither how long it took to get to redline.
never got any knock with the spike either.
i definatly need a new wastegate, but my funds are always tied up with something else.
i might even try two delta gates if i could get on cheap cheap.
never got any knock with the spike either.
i definatly need a new wastegate, but my funds are always tied up with something else.
i might even try two delta gates if i could get on cheap cheap.
yeah,
I am guessing that I am going to be getting some spike with my t-70 TTi kit.
I am planning on converting to a twin turbo kit later this year or early next. so I am trying to start getting parts. like the wastegate. I am going to make the other side the same size and what not of the TTi one, so need wastegate and other materils.
thanks let me know the price
ed
firebird455@onebox.com
I am guessing that I am going to be getting some spike with my t-70 TTi kit.
I am planning on converting to a twin turbo kit later this year or early next. so I am trying to start getting parts. like the wastegate. I am going to make the other side the same size and what not of the TTi one, so need wastegate and other materils.
thanks let me know the price
ed
firebird455@onebox.com
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei