MAF location with multiple turbos

Reply Subscribe

Thread Tools

Search this Thread

Mar 30, 2004 | 04:11 PM

aloha454

Thread Starter

Teching In

Joined: Mar 2004

Posts: 9

Likes: 0

MAF location with multiple turbos

Where is the best place to position a maf ? before turbo or after ? or both

Mar 30, 2004 | 05:03 PM

slow

TECH Senior Member

iTrader: (7)

Joined: Dec 2001

Posts: 6,150

Likes: 7

From: Orlando

i am going to go with a blowthrough setup.

for packaging, its notmally the easiest, and will read the real amount of air going into the motor.

Ryan

Mar 30, 2004 | 05:16 PM

CAT3

Restricted User

iTrader: (9)

Joined: Sep 2002

Posts: 7,603

Likes: 0

From: Sierra Vista, AZ

There have been some ppl I believe attempting to use twin MAFs but the tuning aspect was way out there. The current trend I have seen if using a MAF with TT setup is to join the Turbo discharge tubes and have the MAF located between the joint and the TB, thus making a blow thru!

Good luck.
Charlie

Mar 30, 2004 | 05:44 PM

XLR8NSS

Adkoonerstrator

iTrader: (4)

Joined: Nov 2001

Posts: 21,420

Likes: 0

From: Deep in the seedy underworld of Koonerville

Blow through is probably gonna be the easiest to package on a twin setup. IMO it's not the best for a closed PCV system like the LS1 uses but, it works with some tuning fine.

Mar 30, 2004 | 06:37 PM

slow

TECH Senior Member

iTrader: (7)

Joined: Dec 2001

Posts: 6,150

Likes: 7

From: Orlando

Quote:

Originally Posted by XLR8NSS

Blow through is probably gonna be the easiest to package on a twin setup. IMO it's not the best for a closed PCV system like the LS1 uses but, it works with some tuning fine.

agreed.

is there any way of changing the pcv system for better sesults?

Ryan

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
1 / 1
Next
Last