PRAY HRD

iTrader: (119)

just got my feed flange which has a 1/4" npt so need to get an adapter for npt to -an. looks was thinking -4an but dont wanna over feed the turbo and start smoking. whats the thought on this please?

also going with a -10 drain btw.

Thanks!

Sluggish

iTrader: (10)

I used a -4, no problems so far.

PRAY HRD

iTrader: (119)

no restrictor at all right?

LILHEMI

you only need restrictors on BB turbos. -4 is fine. if you can go -12 on the drain but -10 will work.

PRAY HRD

iTrader: (119)

i'm stuck with a -10 that was already on the oil pan my kit cam with or i would. sounds good, i'll have to pick up a -4. i had a feeling this -3 was gonna be too small.

thanks for the input guys!

Bobsmyuncle

iTrader: (32)

-4 and -10 here

I looked for a good while when I did mine and everyone I seen ha -4 and -10

got-a-ls1

iTrader: (12)

-4 and -10 on a smaller pt7675