No More Drag Radials
Thread Starter
Joined: Nov 2001
Posts: 2,136
Likes: 0
From: Commerce Twp.
No More Drag Radials As many already know, I was in an unfortunate accident 3mos ago. The rear end took a direct hit to the wall that completely destroyed both rear frame rails. So the next logical step was to just take the plunge and go 10.5! With an already potent Billy Briggs LS power plant it only made sense to give a call to one of the nations best race car builders... Skinny Kid Race Cars. Keith took on the job of not only rebuilding a wrecked drag radial chassis but finishing a complete roller.
Then it was off to Reiter Metalcraft for the body work and to put it in prime.
And finally back to Billy Briggs Racing Engines to put it all back together again.
Special thanks to all my Crew and their Families for supporting the late nights putting everything back together again. Joe (Stenod), Kevin, Dan, Billy. Even Keith came by to help on a Holiday weekend!
I put my daughter Lauren to work too.
Thanks again to all my Sponsors and friends who helped make this rebuild possible in such a short period of time:
Lafontaine Automotive Group
Billy Briggs Racing Engines
Mickey Thompson
Mast Motorsports
Diamond Pistons
Then it was off to Reiter Metalcraft for the body work and to put it in prime.
And finally back to Billy Briggs Racing Engines to put it all back together again.
Special thanks to all my Crew and their Families for supporting the late nights putting everything back together again. Joe (Stenod), Kevin, Dan, Billy. Even Keith came by to help on a Holiday weekend!
I put my daughter Lauren to work too.
Thanks again to all my Sponsors and friends who helped make this rebuild possible in such a short period of time:
Lafontaine Automotive Group
Billy Briggs Racing Engines
Mickey Thompson
Mast Motorsports
Diamond Pistons
Trending Topics
Thread Starter
Joined: Nov 2001
Posts: 2,136
Likes: 0
From: Commerce Twp.
Yes on the 4 link and it is satin black primer. I want to shake it down befor the winter gets here and then save up for some paint. Not finalized on the color but I am thinking about a flat metallic silver.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Man...that white looked good but as my sig shows....I'm a fan of black... so I'd be fine if you left it as is 
But anyways, the new rear end and cage work looks awesome Tom, good luck in 10.5.
But anyways, the new rear end and cage work looks awesome Tom, good luck in 10.5. Last edited by 93BlackBeast; Sep 13, 2012 at 01:52 PM. Reason: Typo
Thread Starter
Joined: Nov 2001
Posts: 2,136
Likes: 0
From: Commerce Twp.
