FI mail order tune?
#2
I got a mate here in Aus that's doing it for me, ain't tested it on my car yet, but his confident it will work, my last tune from him was a mail order n/a tune and dyno'd up perfect, let's hope this is the same, the tune his sent me is for a 5.7 lt maffless, 2bar map, using a standalone gearbox, and to suit 71lb injectors that he hi flowed for me. I'm the first mail order tune for turbo his done.
#5
Try lt1pcmtuning.com, he did my n/a trans am and did a GREAT job! He does h/c and forced induction and he's cheap. A lot of people on here knock him but he did great by me and a lot of my friends.
Trending Topics
#8
TECH Addict
iTrader: (17)
Mail order tunes are generally good for H/C/I setups or bolt on cars where you can have a little wiggle room in the tune to be not spot on.
An FI car is a lot different and more crucial to having a tune that is spot on (and a more difficult one to get a good tune with via mail order). I would trust (and I have done this before) getting a mail order tune just to be able to drive the car around out of boost to check everything and be able to drive it. Then I would drive it to the tuner for a full dyno tune which is really what an FI car needs.
An FI car is a lot different and more crucial to having a tune that is spot on (and a more difficult one to get a good tune with via mail order). I would trust (and I have done this before) getting a mail order tune just to be able to drive the car around out of boost to check everything and be able to drive it. Then I would drive it to the tuner for a full dyno tune which is really what an FI car needs.
#9
Launching!
Thread Starter
iTrader: (7)
Join Date: Jul 2012
Location: Goldsboro/Pikeville NC
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
i have a Truck and a 18 foot car hauler.....i just want to make sure things are squared away before the dyno tune..i would hate to tow the car all the way to RPM and find out something was wrong..
#10
Launching!
Thread Starter
iTrader: (7)
Join Date: Jul 2012
Location: Goldsboro/Pikeville NC
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
guys...im looking for a base tune to get the car running to check leaks,cooling and get fluid through my trans..thats it...it will certainly go to the dyno...shouldnt that go without saying?..ive already sent Ryan @ RPM a message about a base tune since he is only 35 min from me..just waiting for a PM
#12
10 Second Club
iTrader: (37)
guys...im looking for a base tune to get the car running to check leaks,cooling and get fluid through my trans..thats it...it will certainly go to the dyno...shouldnt that go without saying?..ive already sent Ryan @ RPM a message about a base tune since he is only 35 min from me..just waiting for a PM
#13
Launching!
Thread Starter
iTrader: (7)
Join Date: Jul 2012
Location: Goldsboro/Pikeville NC
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
yeah, i hear ya...i should have added more info in my first post..dont know anyone with HP tuners..all my friends run ford motors in their fox bodies ...LOL
Just checking, ya never know. All this info wasnt in your original post. On a side note, If you have or know someone who has HP tuners the shop doing the dyno tune might send you a free "canned" tune just to do what your wanting and get the car to them ready to dyno with no problems...
#15
TECH Addict
iTrader: (17)
guys...im looking for a base tune to get the car running to check leaks,cooling and get fluid through my trans..thats it...it will certainly go to the dyno...shouldnt that go without saying?..ive already sent Ryan @ RPM a message about a base tune since he is only 35 min from me..just waiting for a PM
You should be fine.
#16
TECH Addict
iTrader: (11)
installed my D1SC, fuel pump, left out the injectors, and didnt connect the blower, just left the stocl lid on and drove it 60 miles to the tuner 0 problems. got there, installed my 60# injectors, connected the blower to the TB, and he put a base tune in it and started going to town. dont even waste ur money on a mail order.... go to the dyno and get it done right... like mentioned before, on a H/C/I car, itd work...still not the best, but for FI, Dyno all the way.....it densest take much to pop a motor with FI when it comes to tuning...
#17
TECH Addict
iTrader: (17)
A lot of times if you just want a mail order tune just to get it to your tuner for the full dyno tune, they will refund the difference of the mail order tune. Not everyone does this, but many do, and at that point it's almost foolish not to get the mail order tune to drive it for the full dyno tune.
An estimated mail order tune would be better than no tune at all.
An estimated mail order tune would be better than no tune at all.
#19
Launching!
Thread Starter
iTrader: (7)
Join Date: Jul 2012
Location: Goldsboro/Pikeville NC
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
im coming from a pushrod ford 302 background and without a tune or chip my 302 would not even idle or anything...
will the LS 4.8 with 60lb injectors and a LS1 MAF start and idle decent without a tune?
will the LS 4.8 with 60lb injectors and a LS1 MAF start and idle decent without a tune?