Poor mans LSX Real Street.......Car is sold- New car/Wifes car= new updates
#81
9 Second Club
Thread Starter
iTrader: (33)
Join Date: Nov 2003
Location: Lafayette Indiana
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Was that a wolfe bolt in, you added the front bars? erics stuff is gona be alot nicer to work on the car, thous front bars looked right in the way.
How much more time till it gose to erics? if you want to put the time in, you have 10 easy spots of 5-10#s doing nothing, or in the way. over 150#s for free.
cars looking good!
How much more time till it gose to erics? if you want to put the time in, you have 10 easy spots of 5-10#s doing nothing, or in the way. over 150#s for free.
cars looking good!
Thanks man, i love this car. Yes wolf bolt in with the SW add on kit. The bars were really in the way! Goes to Eric march 8th, so yea buddy if you're willing to help out let me know where the extra lbs are at and i'll choppy chop chop them away
#84
OWN3D BY MY PROF!
iTrader: (176)
Since you are having the cage redone does he plan on using the existing plates welded to the floor? I had a company install a 10 point in my car a little over a year ago and they did a horrible job. I want to have it redone, but need to do the same removal you did. Being weight conscious I'd like to get the existing plates out of there as well, but it looks like hell.
#85
Launching!
Join Date: Aug 2004
Location: Crowley, Texas
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
http://www.leashelectronics.com/ is where you order it from, he makes great stuff.
If the link is not allowable I apologize.
Leash electronics
If the link is not allowable I apologize.
Leash electronics
#87
9 Second Club
Thread Starter
iTrader: (33)
Join Date: Nov 2003
Location: Lafayette Indiana
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Since you are having the cage redone does he plan on using the existing plates welded to the floor? I had a company install a 10 point in my car a little over a year ago and they did a horrible job. I want to have it redone, but need to do the same removal you did. Being weight conscious I'd like to get the existing plates out of there as well, but it looks like hell.
#88
9 Second Club
Thread Starter
iTrader: (33)
Join Date: Nov 2003
Location: Lafayette Indiana
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Your car is the jam! I'm looking forward to some more videos this season, I'm always digging your choice of radio stations . I was thinking i should put mine back in now!
#89
9 Second Club
Thread Starter
iTrader: (33)
Join Date: Nov 2003
Location: Lafayette Indiana
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Next week or two, I'm expecting the short block this week or next week. Cylinder heads are still at least a month out, maybe longer. I just today went and picked up my $425 worth of GM gaskets so i can re-seal up the 408 i took out, and seal the new engine as it gets here. I'm maybe 2 weeks out from pulling the good old stock setup from my wife's car and putting the 408ci and built trans in there for her.
Car is ready to go to the chassis shop, so i'll clean her up a bit and snap a few pics. Progress has slowed for now, but end of march ***** gonna get crazy!!!! Parts are collecting as we speak!
Car is ready to go to the chassis shop, so i'll clean her up a bit and snap a few pics. Progress has slowed for now, but end of march ***** gonna get crazy!!!! Parts are collecting as we speak!
#91
Launching!
Join Date: Aug 2004
Location: Crowley, Texas
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Thanks man. Unfortunately any future videos of my car will more than likely not come from me. The car is for sale as a roller.
#94
Launching!
Join Date: Aug 2004
Location: Crowley, Texas
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
#96
9 Second Club
Thread Starter
iTrader: (33)
Join Date: Nov 2003
Location: Lafayette Indiana
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Hadn't ever herd about it. Got a link to the rules? If they fall in line with Real Street I could be game. Otherwise I'm out, only building the car for one set of rules.....but yea link??
#99
9 Second Club
Thread Starter
iTrader: (33)
Join Date: Nov 2003
Location: Lafayette Indiana
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
I'm running BS3, I've had it for quite a while now. Brent and Bob talked me into it and cut me a great deal.....back when EPP was around. Otherwise I'm not sure what I'd do....most likely what you have planned.