NBM-LS1 Single Mount V.2.I Don't know anymore LOL *UPDATE 11/8/13*
#25
TECH Resident
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: STL, Mo
Posts: 954
Likes: 0
Received 0 Likes
on
0 Posts
The pump is the dominator 1400 billet pump by Holley. It's going to be external and sumped. If I was going twin in tanks I would have just kept my plastic tank. But I like to fabricate things so I figured I would make my own tank.
Thanks for the kind words guys!
Thanks for the kind words guys!
#26
TECH Resident
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: STL, Mo
Posts: 954
Likes: 0
Received 0 Likes
on
0 Posts
Got a few more things done.
Im going to be running the AEM Tru boost with their AEM failsafe gauge. This way if anything were to happen and the car were to go lean it will drop off all boost pressure to the gated pressure.
finished welding the tank up.
new valve covers are welded up for the catch can.
Gauges re-wired along with a oil temp gauge installed.
Im going to be running the AEM Tru boost with their AEM failsafe gauge. This way if anything were to happen and the car were to go lean it will drop off all boost pressure to the gated pressure.
finished welding the tank up.
new valve covers are welded up for the catch can.
Gauges re-wired along with a oil temp gauge installed.
#27
TECH Resident
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: STL, Mo
Posts: 954
Likes: 0
Received 0 Likes
on
0 Posts
So since I can't ever make up my mind and I am completely busy with other customer this is what i have so far. I've changed up a few things between the intercooler and radiator mounts. I'll be running a degas bottle over a radiator since my radiator sits so low in the car. I now have a 9" and some other little things.