j88l98irocz

iTrader: (44)

Looks great!

j88l98irocz

iTrader: (44)

Thanks it should move out. If it hooks....

LT1TA

iTrader: (17)

very nice job. I am obviously a fan of the red car. The red adds torque under the curve. None the less, I am very impressed with the build. I JUST may try to do the wire tuck. I have no idea how to solder, it can't be too hard. I have 2 downpipes that are bullying my wiring in the bay. Can't wait to see this thing on the road. May be a stngkillr twin

j88l98irocz

iTrader: (44)

Yeah I like the red also haha thanks for the kind words, the car should make a bunch of power. Soldering is easy it's just time consuming extending over 150 wires x 2 soder joints per wire is over 300 connections to soder and heat shrink.
Yeah my white cars nick name is Casper lol

allout06

iTrader: (11)

thanks man!



on a side note. ill be able to wire tuck both passenger and drivers side harness wihout cutting any wires.

j88l98irocz

iTrader: (44)

Cool That's great

allout06

iTrader: (11)

u just gotta cut a hole large enough in the drivers fender to get the connector that goes into the firewall through it. harness stays in factory position, just dropped below the fenders

when u gonna have this thing runnin? hp goal?

j88l98irocz

iTrader: (44)

Glad that worked for you I wanted more clearence though. Hp goal alot it'll hopefully be running in a few weeks. I still have another month to wait for my mid west chassis fab 9in and It'd probably be done sooner if I stopped playing with my red one lol deleted side moldings, hose mod, egr/air delete, put chrome zr1s on it today. After I mow the lawn tomorrow the rest of the day will be dedicated to the turbo car

j88l98irocz

iTrader: (44)

Boom it's in!

Turnin20s

iTrader: (12)

Subbed, the car looks great

j88l98irocz

iTrader: (44)

Thanks bro

allout06

iTrader: (11)

looks awesome! 2 things

1. howd u put the motor back in? im just tryin to put the engine/bare member in

2. be careful with those valve covers, i bought the same ones and sent them back, they were no where near flat on the bottom and would rock like crazy on a flat surface and i could get a feeler guage between the seal and the head. i also had a gap on the passenger head in the rear. just a heads up! they may leak.

j88l98irocz

iTrader: (44)

Valve covers are flat but going to keep an eye on them. I put the engine in from the bottom.

MR2liter

iTrader: (11)

Looking good. +1 for arctic white ..

j88l98irocz

iTrader: (44)

how's that 10 bolt holding up..

MR2liter

iTrader: (11)

Surprisingly well actually. . If you can keep them from hopping they take some abuse. But I do keep spares around

j88l98irocz

iTrader: (44)

Yeah I've had a bunch of them hold up as well just keep street tires on them and no high rpm clutch drops with sticky tires

allout06

iTrader: (11)

did u put the motor on some sort of a furniture dolly? im.tryin to.figure out how im.going to do mine. i took out through the bottom

j88l98irocz

iTrader: (44)

You will snap a Furniture dolly in half you need to use heavy duty Dolly's or rollers.

B(o)(o)sted98TA

iTrader: (3)

When painting the engine bay... are you guys not sanding or anything?