ls1_chevelle,
thanks for the reply.
david

 

no worries.

 

Will this waste gate work for me?
Or is it too much?
http://www.ebay.com/itm/200955669994...84.m1423.l2649

I'm thinking I will probably only put 8-12 lbs. boost.

thanks,
david

 

Seems odd it only has a top port on it. What turbo and engine size?

 

and for $160 theres better options

 

http://www.ebay.com/itm/Turbo-Wastegate-50mm-Type-GT-14-PSI-1-bar-RED-Nissan-Toyota-Mazda-Acura-Subaru-/181047683671?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a27486a57&vxp=mtr
ive been using these for nearly everything lately, working great

 

hey denmah i know you use the efisource 3 bar map, have you tried their direct fit 3 bar map? i need a 3 bar sensor and that would def be easier just not sure of the quality

 

yep it works great we have it on 2 cars, not buying the old style anymore since they are the same price and drop into the late model harnesses FTW

 

Thanks for the replies. I'm going to go with denmah's, "The Guru", suggestion.

 

perfect thanks

 

Mine is a 2001 LM7 5.3.
The injector plug says Delphi on it.
Most of my locks are broken.
What connector do I have and what style injectors should I buy?
EV1, EV6?
Link for Dephi replacement connectors?
Will these replace mine?

http://www.ebay.com/itm/Quick-Release-Delphi-EV1-Fuel-Injector-Harness-Pigtail-Connector-Dorman-85136-/291023431777?pt=Motors_Car_Truck_Parts_Accessories&hash=item43c2592861&vxp=mtrThanks,
David

 

Here's some pics of what I have now.

 

You have connector A and you listed an eBay sale for connector D, these are not interchangeable.



I think the connector you want is called PT2135 and boy are they expensive. If you're reading this you're probably running boost which means you're probably swapping injectors. If that is the case, get something with more common connectors like the EV1 or EV6 style.

Just my opinion...

When you say "locks" are you talking about the white plastic bits? Those are the safety, I pull those out and haven't had trouble with the actual lock.

 

Knock Sensor Valley Pan Grommets Seal Gaskets does everyone reuse them or get new ones, if new what is everyone buying.

thanks for the Help

 

Is there a link to show what style injector plug you have? Im doing a 2004 GTO and it has the long injectors. Im getting the 60lb, but what style plug do I need? Never mind I see them thanks!

 

gofastwclass,
thank you for the info.
the sliding lock is what is broke and I can easily pop my connectors off.

 

How are you guys supporting your turbo.
It is quite heavy and I'm concerned about just letting it sit/hang on the hot side pipes.
Any pics of supporting it?
I've seen some pics of brackets welded to the frame rail. But I have stock clam shell motor mounts, so my motor does move some.
thanks,
david

 

This is how I support mine on a fox body.

 

 

twinturbo,
are you using solid motor mounts?