Twin turbo c5

I decided today to redo my kit. I was going to put it in the grill but I would have change up everything. So here is my new placement







Here's the old setup.



Pretty close to the same but different . Lol!

Twin turbo c5

Made a nice little bracket to hold the weight of that s480 come out pretty nice . Hot side next but gotta order some parts.

Budget LS Guy

Did you cut your frame rail? Wont that effect the rigidity of the car?

Twin turbo c5

Yes to make some room. I've welded and cut on that rail so many times changing my turbo kit it wasn't doing much good. But yeah it does effect rigidity but that's why I bent some roll cage pipe to brace It back up . If you'll notice in the pic above.

Twin turbo c5

Got a decent merge made for the mont today. Just used some mild steel I had laying around . Getting close to being done fonally. Motor should be done by this weekend and I should be completely done with the turbo kit . Microsquirt harness is almost done too. Gettin close to some burnout video's.

Twin turbo c5

Making progress on the hot side slowly. My tig run outta gas last night so I decided to just mig it up. I'm not to into looks on this car so it'll work for me and its faster. Got a few more pieces to weld up on the crossover then I'm done..

Twin turbo c5

A few more pieces and its done. Then gotta do something with tha down pipe not sure yet on that. Lol

Twin turbo c5

Got a little work done on my trans crossmember . Turned out alot nicer than I planned . I used some old 69 nova solid motor mounts and some old roll cage tubing for my 4l80 crossmember . Not bad for a days work. Didn't buy anything just used a little gas in the mig.

Twin turbo c5

Here's a pic of the finished crossover .

Twin turbo c5

Got my crossmember made . Had some solid motor mounts that I cut up and made some tabs to fit the crossmember for tha 4l80e. And bolted my old crossmember up that I had on my glide. Had to do a little hammering on the floor for clearance but no big deal.

Twin turbo c5

Gettin some lose ends tied up. Got some new fuel lines on. Gettin closer to some burnout vids.

Twin turbo c5

Fairmont getting close to being back on the road. Engine bay getting full. Rebuilt stock 6.0 ptc 9 1/2 inch converter and isky triple 12 and 4l80e. Also micro squirt with a tranny controller running with tuner studio.

Budget LS Guy

Were you able to wire up your factory turn signals, brake lights, etc...?

Forcefed86

iTrader: (4)

Interested to see how you like the "baby" hotside on the 6.0. I just redid mine in 2" as well, left it divided though. Trying a 370 this year.