best place to tap in for boost gauge?
Thread Starter
Teching In
Joined: Apr 2003
Posts: 15
Likes: 0
From: Millersville, MD
best place to tap in for boost gauge? Where is the best place to t in for the boost gauge? I know it has to be manifold vaccum,but where is the best one for an accurate boost reading? Thanks
TECH Fanatic
Joined: Dec 2001
Posts: 1,220
Likes: 0
From: Germantown, MD
I "T" into the vacuum line right before the check valve line at the back of the manifold. It's a little bit of a pain to run it like that but you get a very strong signal. If you follow the brake booster line to the back of the manifold there is the factory port into the manifold. The drivers side feeds the large brake booster and the passenger of the port goes to the check valve. That's the spot I'm talking about.
Mike
Mike
