Gear ratio?
Gear ratio? Just curious what most of you are running for gear ratio?? Post up what you have for car weight, motor, tranny, twin or single turbo and any times that you run at the track.
Im in the process of building a 5.3 with a single Turbonetics Billet 76/75, T56 tranny. Its a full weight 02 camaro ss. I got a set of 3.25 gears going into my Moser 9". No times yet but hoping for 10's.
Trending Topics
Ive been wondering this as well Im in the process of building my first FI build. Ive always been a nitrous guy. Im assuming all the procharged guys are running a high gear ratio as well?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
when my car was procharged I ran a 3.70 gear. Went 9.80 like that.
Now with the Turbo I run a 3.25 gear.
3420 lbs 385ci sigle 88 Th400 with brake. 3.25 with a 28" tire. Went 8.79@158 like that
Now with the Turbo I run a 3.25 gear.
3420 lbs 385ci sigle 88 Th400 with brake. 3.25 with a 28" tire. Went 8.79@158 like that
I was told that my 4.11 gears are too deep to tun with a turbo set up. When I had my nitrous set up it worked well. The car when it was a NOS set up without me in it weighed 2970 ready to race. I weigh 170. Now with turbo set up I haven't weighed it but with adding intercooler and turbo's, piping etc.... And adding more roll cage it will probably be in that 3100 area. ??? I'm looking at 3.25 or 3.00 with my th350 tranny with a deeper first gear(2.75 instead of the 2.55) and it has a transbrake. Just don't want it to be too low of a gear. Leaning more towards the 3.25.
