Procharger support bracket
Procharger support bracket I could not find a support bracket for the back of the Procharger so i made my own. I am using an iron block so as you may know there is one less mounting point. I went from a D1SC to an F1R using the Aster bracket and i want to make sure i have the least amount of flexing as possible.
Now made to fit sway bar.
Now made to fit sway bar.
Last edited by ls1290; May 24, 2013 at 11:41 PM.
Thank you
I was thinking about making more. I made this one at work i don't have a welder at home yet. If i don't buy one soon i may just borrow the welder from work and build some at home. This bracket will work with the standard Procharger bracket as well.
I was thinking about making more. I made this one at work i don't have a welder at home yet. If i don't buy one soon i may just borrow the welder from work and build some at home. This bracket will work with the standard Procharger bracket as well.
Oh btw what does your car weigh? Thats a pretty nice time with the D1 in your sig. Ive got the exact same setup as you, 370 9.5:1, just bought TFS 235s, EPP, and LS6 intake with kooks headers lol. AND I have a red Camaro too lmao.
How much boost are you wantin? ET your shootin for?
How much boost are you wantin? ET your shootin for?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Oh btw what does your car weigh? Thats a pretty nice time with the D1 in your sig. Ive got the exact same setup as you, 370 9.5:1, just bought TFS 235s, EPP, and LS6 intake with kooks headers lol. AND I have a red Camaro too lmao.
How much boost are you wantin? ET your shootin for?
How much boost are you wantin? ET your shootin for?
That sucks you lost oil pressure, but now you are going forged turn up the boost. Good luck with the new build.
The best 1/8 mile run was 6.13 @ 113. I was blowing through the converter i believe i have that problem solved now. I see no problem on you running 5.80 with an F1a. I also ordered a mig welder today so i can get started making the bracket for you soon.
How much does your car weigh now Redz? KP's car ran 8.90s with the F1-A and a TH400 at 3300#
I am getting the weight out of mine little by little. working on air bags and the rest of the HVAC this upcoming weekend.
I am getting the weight out of mine little by little. working on air bags and the rest of the HVAC this upcoming weekend.
I'm guessing 3700, it was 3650 without the cage last time I weighed.
