Burken01

iTrader: (88)

I know "gimmeluvin" ran 12 psi on his forged 347 with the 76gts (pt7675) and was at 650 hp... I would say its safe to say 650-800 hp would be easy for that turbo

simplysix

iTrader: (1)

Saw Brian put this on Facebook yesterday, very nice numbers!

02LS1ram

iTrader: (17)

Awesome results. I'm really looking forward to see what I put down with my pt7675. On Another note if your 80's were maxed out then I'm gonna be in trouble bc I'm still using my 60's from when the car was procharged. I Guess I'm gonna have to upgrade to 80's

02LS1ram

iTrader: (17)

What are you running for a fuel system in the car?

Blackpanther99

iTrader: (8)

Nice number man. Congrats.

Ryans99ls1

iTrader: (16)

3in DP, dumped right after the kmember

Ive got a lonnies double pumper kit(twin gss340s). -8an, -6an return, A1000 fuel reg, Fast rails with 80lb injectors. He said the injectors were high in the 90s for duty cycle.

I can see this turbo making over 900, if i had the fuel/bottom end for it. 18-22psi would be nuts!

See above.

Thanks for all the compliments guys!

evo462

iTrader: (27)

Nice...I'm hoping for somewhere over 600 RWHP on my 2002 LS1 with 241's and E85 using a Turbonetics T78

Ryans99ls1

iTrader: (16)

should have no problem as long as you arent afraid to throw a little timing in it!

coolmanvette75

iTrader: (2)

That is damn impressive. Makes me really look forward to seeing what my 370 T7875 setup will do on 20lbs...

SKULL

iTrader: (7)

next time it goes on the dyno. pull the intercooler and put a pipe in place of it. im interested in what the ebay intercooler is robbing you

Ryans99ls1

iTrader: (16)

The 7875 might be a lil small for a 370, you might have some back pressure issues.

As for the intercooler, id be interested too but the next time it goes on the rollers will be for a dyno day. Probably won't have time.

78buturbo

iTrader: (1)

those be some good numbers is that on pump gas?

LSX_AL

i believe he is running e85.. at least thats what it says on his sig.

chiaj144

iTrader: (4)

My 5.3 put down 587rwhp at 12.8 psi with a little mpt70 through a th400 with 91 octane pump gas, windshield washer fluid and 14 degrees timing. 600 will be no problem.

coolmanvette75

iTrader: (2)

With the new wheel from Turbonetics I think it will be real good for that CI. Yea I would rather run an S480 or something but the 7875 bolts right up w/o modifying anything. On a 1.15 a/r I think it will work well. We'll see. In the meantime, more videos!

Ryans99ls1

iTrader: (16)

video. 720 on this pull, pull after this was 760 but i didnt get a video, im sure one will pop up soon.



These were also todays dyno day results.


car has made a lot of 3-4th gear WOT pulls and still kicking!