1INSANEGTO

iTrader: (13)

Well figure I would share. After a few emails and posts on efilive lsxworks shared the Data for the E67 PCM FlexFuel option. This car started as a compound boost setup. Factory blower + Twin GT3076R's.

Well due to heat issues I removed the supercharger and went with a stock ls3 intake and custom A2A intercooler.

Before the car dyno'd at 624rwhp on pump with a very rich tune. Could have gotten 680rwhp fixed the af but it was a baseline.

SeriousHP in Houston has completed the swap for me. Also doing the ethanol sensor install. Added head studs and new head gaskets along with big transmission cooler.

Marty at IRC Fabrication built be a badass intercooler.

Everything if goes as planned should be ready sat.

Pics of the whole process.

Before swap.


At C&C


TT Setup


Work








Ethanol Sensor




Intercooler. Note I added extra IAT location as well as I can check temp per side.






More to come.......

venom ws7

iTrader: (13)

Very nicely done congrats.
Crank up the boost the LSA Can take it

cyipher

iTrader: (1)

p/n for that e85 sensor?

gtslo88

iTrader: (1)

Isnt this motor a 434 LSX?

1INSANEGTO

iTrader: (13)

Item: 13352241 - Flex Fuel (E85) Composition Sensor Harness
Item: 13577429 - Fuel Composition (Flex Fuel) Sensor (E85)

Nope. But that one you are talking about made 1026rwhp at 24psi with a 434lsx + Twin GT35R's

Reject

iTrader: (24)

pretty sweet setup! does that sensor do like a percentage of ethanol or how does that PCM work (never played with that pcm)?

gnx7

iTrader: (28)

I like that it runs factory exhaust manifolds!

I'll take the same car but in a 6spd.

Any cooling issues when driven hard and a/c on?

1INSANEGTO

iTrader: (13)

Works just like this. You can do it in efilive and hptuners..

1INSANEGTO

iTrader: (13)

I will find out soon enough. I will put miles on it after the hoilday.

turbotuner20v

So you would have to tune a car at least 3 times with this flex sensor. On 91oct, ~E70, and ~E85.

Then you would say from ethanol = 0% - 15% run the 91oct. map, from E60-E75 run the E70 map, then from E76-E90 run the E85 map? And this would get you close enough to pump from any E85 pump without worrying about the ethanol percentage?

1INSANEGTO

iTrader: (13)

Correct.

Blackpanther99

iTrader: (8)

Interesting stuff.

1INSANEGTO

iTrader: (13)

Think it will cool?

1INSANEGTO

iTrader: (13)

This is fitting

1INSANEGTO

iTrader: (13)

1INSANEGTO

iTrader: (13)

The clamps should be fine as its all bolted but I will order tbolts to swap when I'm bored one day... Dyno tomorrow and feelings hurt this weekend. Finally get to use my weld RT's and DR

Z06KILLR

Thats a wicked ride man! We Stretched them out on S.H. 249 after Cars & Coffee (99 Red Mustang).

Were you running E85?

The 09+ V's is probably my favorite ride. Then you added Twin Turbo's and E85. Awesome! You live in the area?

Blackpanther99

iTrader: (8)

Ohh it will cool! LOL

1INSANEGTO

iTrader: (13)

Yup that was me. I was playing with the manual shifting crap when you left. I left and made that pull in 4th.

I live in Fairfield off 290 mason area.

After that run I went home and put these on cause even on a 4th gear pull it burns the tires.

Z06KILLR

I'm right at 249 and Spring Cypress.

Ever hit any of the nights meets on the weekends around here? PM me if you dont want it public. Only lived here a few years.