5.3 Build, BW S400SX Choices
05-30-2013, 02:24 AM
#27
I'm hoping this is a friendly rivalry? I'm somewhat new here.
We picked a BW S476.
S400SX-76R CAST 1.10AR 87mm T6
Martin will design my cam.
I would be really excited, but I'm going to race the car with the 496 this summer while gathering parts for the L33 swap. So these neat items won't go on the car until winter.
With the cam here early, I'll be able to assemble the complete engine way in advance.
Thanks Martin.
Ron
We picked a BW S476.
S400SX-76R CAST 1.10AR 87mm T6
Martin will design my cam.
I would be really excited, but I'm going to race the car with the 496 this summer while gathering parts for the L33 swap. So these neat items won't go on the car until winter.
With the cam here early, I'll be able to assemble the complete engine way in advance.
Thanks Martin.
Ron
05-30-2013, 10:29 AM
#30
8 Second Club
I'm hoping this is a friendly rivalry? I'm somewhat new here.
We picked a BW S476.
S400SX-76R CAST 1.10AR 87mm T6
Martin will design my cam.
I would be really excited, but I'm going to race the car with the 496 this summer while gathering parts for the L33 swap. So these neat items won't go on the car until winter.
With the cam here early, I'll be able to assemble the complete engine way in advance.
Thanks Martin.
Ron
We picked a BW S476.
S400SX-76R CAST 1.10AR 87mm T6
Martin will design my cam.
I would be really excited, but I'm going to race the car with the 496 this summer while gathering parts for the L33 swap. So these neat items won't go on the car until winter.
With the cam here early, I'll be able to assemble the complete engine way in advance.
Thanks Martin.
Ron
05-30-2013, 07:57 PM
#33
I'm hoping this is a friendly rivalry? I'm somewhat new here.
We picked a BW S476.
S400SX-76R CAST 1.10AR 87mm T6
Martin will design my cam.
I would be really excited, but I'm going to race the car with the 496 this summer while gathering parts for the L33 swap. So these neat items won't go on the car until winter.
With the cam here early, I'll be able to assemble the complete engine way in advance.
Thanks Martin.
Ron
We picked a BW S476.
S400SX-76R CAST 1.10AR 87mm T6
Martin will design my cam.
I would be really excited, but I'm going to race the car with the 496 this summer while gathering parts for the L33 swap. So these neat items won't go on the car until winter.
With the cam here early, I'll be able to assemble the complete engine way in advance.
Thanks Martin.
Ron
It never was my strong suit.
Glad we could keep you guys entertained.
05-30-2013, 10:52 PM
#35
[QUOTE=87silverbullet;17440100]If you turn it up enough, it'll run.
This is what an LS1 with 19 psi does at 5800 ft elevation. You don't have as much but it will really come close to that 496 I would think.
Sweet!
My heap has been on the rear bumper....not a fan of that....
Ron
This is what an LS1 with 19 psi does at 5800 ft elevation. You don't have as much but it will really come close to that 496 I would think.
Sweet!
My heap has been on the rear bumper....not a fan of that....
Ron
05-30-2013, 10:57 PM
#36
[QUOTE=87silverbullet;17440100]If you turn it up enough, it'll run.
This is what an LS1 with 19 psi does at 5800 ft elevation. You don't have as much but it will really come close to that 496 I would think.
[QUOTE]
Sweet! I'll be happy if it runs 10 flat, which is where it is NA. Spray put me on the bumper, that was not a fun ride when not expecting it at all.
Ron
This is what an LS1 with 19 psi does at 5800 ft elevation. You don't have as much but it will really come close to that 496 I would think.
[QUOTE]
Sweet! I'll be happy if it runs 10 flat, which is where it is NA. Spray put me on the bumper, that was not a fun ride when not expecting it at all.
Ron
06-19-2013, 07:16 PM
#39
8 Second Club
