76mm street Nova runs 8.39/163.75 mph!
#1
76mm street Nova runs 8.39/163.75 mph!
Finally got a halfway decent hit on the car. Running the new billet S476/92/T4, on my factory bottom end 317 headed 6.0L. Drove car to and from track an hr in 100 deg heat then raced it in mid 90 deg temp hot off the street. Crowded hot slick fri night tnt track 3300' Da. No comp lic yet so only got 1 1/8 mile and 1 1/4 mile pass. Still running car off the foot brake, still afraid to try the trans brake lol. I somehow blew an injector out of the fuel rail and let out a little early when I saw the fuel spraying on windshield. Thought engine blew. Lucky there was no fire. Have some crappy vids but pos at&t internet has been down all weekend. All I have is my phone.
Slip reads:
R/T -.045
60" 1.364
330' 3.557
1/8 5.416/132.14
1000' 7.027
1/4 8.39/163.75
Slip reads:
R/T -.045
60" 1.364
330' 3.557
1/8 5.416/132.14
1000' 7.027
1/4 8.39/163.75
Trending Topics
#8
TECH Fanatic
Junkyard GM engines running big money engine times. Dang so impressive. Yeah give us a run down of specs. We already know 6.0 with 317s.. obviously a cam. What psi for this awesomeness lol????
#12
Thanks guys. Car is 3300 lbs full interior street car with stereo back seat etc. cam is my stg 2 truck cam 218, .570", 112 lsa. Boost was 23 psi, and 15 deg of timing. Engine is factory crank, pistons, and rods all GM tty bolts in lower end. Has been cleaned and dingle ball honed with new GM rings. Zero machine work on block and only a surface on heads. Heads have a mild port with stock valves.
#18
8 Second Club
iTrader: (12)
Thanks guys. Car is 3300 lbs full interior street car with stereo back seat etc. cam is my stg 2 truck cam 218, .570", 112 lsa. Boost was 23 psi, and 15 deg of timing. Engine is factory crank, pistons, and rods all GM tty bolts in lower end. Has been cleaned and dingle ball honed with new GM rings. Zero machine work on block and only a surface on heads. Heads have a mild port with stock valves.
Now everyone is going to buy that turbo lol
Last edited by Camaro9969; 07-28-2013 at 09:42 PM.