is this a good cam for my 6.0?
Thread Starter
TECH Enthusiast
Joined: Jan 2012
Posts: 622
Likes: 1
is this a good cam for my 6.0? i have a cam that was going in a different motor but things have changed and im now going to use a stock 6.0 truck motor in steed of the high comp 383 that the cam was in before.
the setup
6.0 truck motor
prc 2.5 cnc 317 heads (72cc)
ls6 IM
pacesetter LTs
twin rear mounted PTE billet 5858s (.82 ex and ported s cover)
cam specs
Camshaft: 224/228, .581'/.588', 114 LSA
this will be my DD this time around and id like to keep a good balance of drive ability and over all power/ fast spool
it was a good cam in the last motor but i just dont want to leave anything on the table with the new motor if i can do better this time around
-alex
the setup
6.0 truck motor
prc 2.5 cnc 317 heads (72cc)
ls6 IM
pacesetter LTs
twin rear mounted PTE billet 5858s (.82 ex and ported s cover)
cam specs
Camshaft: 224/228, .581'/.588', 114 LSA
this will be my DD this time around and id like to keep a good balance of drive ability and over all power/ fast spool
it was a good cam in the last motor but i just dont want to leave anything on the table with the new motor if i can do better this time around
-alex
