krazy4

iTrader: (5)

Look forward to the dyno video being posted on here! Car made nice power!

Blown06

iTrader: (32)

I see your getting less and less sloppy with each build..............

Nevermind, I saw the video with the drill and the dash light. You sir, are out of control.

denmah

iTrader: (2)

Torqueshaft

Nice...

stock48

iTrader: (17)

Good job man think you have a shot at single digits first time out

TDagen

Awesome!

Dang that thing sounds tough.

What are you revving it out to? Also what kind of fuel was this on?

BanditDave

iTrader: (11)

Good news, you guys were spot on! Only took a couple taps with my rubber mallet and she moved into place. Only pisser is I have the ATI SFI flex plate and only line up with 3 of the 6 bolts. Whatever, it will take way more shear force than that engine can put out to break those bolts so I am not worried.

Great advice guys and glad to see I wasn't the only guy having trouble.

I'm assuming with dyno numbers comes dyno vids...I shall park myself and wait...

TDMKR496

iTrader: (3)

Wow thats amazing! Stock 5.3 heads wth springs and studs? 93 octane and 80 lb injectors? How much timing were you running?

ls1_chevelle

iTrader: (9)

Right on, glad to here you got it. I was borderline gonna hulk smash something when mine didn't go well hahaha

ls1_chevelle

iTrader: (9)

Sounds awesome Matt!! Pics up some good power per PSI

It'llrun

Matt, it looks as if you've got a tad more power than before... Like I was sayin' ... ya might wanna invest in the tire/rubber company of your choice as your tires will never last! Have you had the torque boxes welded up? You'll want that done before you even consider traction, or they'll rip like a sheet of paper! I'm kinda remembering that chassis is the same as a 79-93 Mustang, so it should be rather easy if my memory is right(but you've probably done it).

It's gonna HAUL with a solid connection to the ground. Congratulations on "slapping together" a really strong build! Have fun when the weather allows it.

LILHEMI

matt if mike can get some 275 pros on there you should get some too. thats the only thing besides full slicks thats gonna hold this power brotha. can we make a 700 RWHP pump gas club? BWAHAHAHA

TDagen

Wow, it makes about 30 whp per psi after 9 psi. Looks like this turbo really starts to shine above 10 psi.

Which S476r is this, Cast or Billet? Also which turbine and hotside does it have?

This car is going to hurt some feelings!

It'llrun

He'll need to roll those quarters in for 275's... and he'll wanna check inside clearance too, but it should be all good on the right wheel. I think they'll be too much for the 10-hole, but someone has probably done it.

408GT

iTrader: (2)

I have MT 275/60/15's on my Zephyr with 15"x10" on 6.5 b.s. Very tight fit, but they're under there. I think a 275/50/15 would fit better.

Good numbers Denmah. Can't wait to see more!

denmah

iTrader: (2)

Billet s476r t4 87mm hotside

denmah

iTrader: (2)

6800rpm
gasoline and methanol (washer fluid)

denmah

iTrader: (2)

i went 9s on a 255 radial, i have 235s this time for fun ill see how fast she goes

TDagen

Awesome, I was wondering if it was the billet!

Nice! Killer powerband!

Forgive me, I remember you mentioning the fuel mix earlier in the thread iirc.

I wish you were in my area with this beast. You could take peoples money, I mean make money all day long with this car LOL! Paint the compressor cover on the turbo, and the intercooler black for stealth money making mode haha.

It'llrun

Cool. Did you not even need to roll the quarter panel edges?

CEREALLY? You CRA CRA!

and we all wanna know how that turns out, so film it!