03 C5 Corvette Z06 front mount turbo build
#24
TECH Enthusiast
iTrader: (7)
Join Date: Feb 2011
Location: frederick, Maryland
Posts: 562
Likes: 0
Received 0 Likes
on
0 Posts
how hard was that bumper to get off lol. im doing a d1 setup on my 03 c5z on e85 and want to pull the hood and bumper while I change some stuff and dunno how hard it is to pull the bumper. love the build btw
#28
Launching!
Thread Starter
iTrader: (21)
Join Date: Jul 2010
Location: california
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Hopefully the clutch won't be an issue... I'm running a spec on my camaro and so far is hanging in there with 780rwtq... He also adjustable clutch master cylinder and new slave cylinder.
#31
Your heater hoses cleared underneath the front part of the turbo manifold? My kit was literally laying on the rubber hoses.
Also glad to see my intercooler working for ya!
Also glad to see my intercooler working for ya!
#32
Launching!
Thread Starter
iTrader: (21)
Join Date: Jul 2010
Location: california
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Yes it cleared but it's very very close but I also wrapped the manifold n down pipe... we did run into a problem. Since this is a T-series not a TC the coolant expansion tank is hitting the compressor housing. I know Canton sells a nice tank but where having one made for free. Another issue we ran into was the piping that connects to the rear axle back didn't line up at all. That intercooler saved us a lot of time and looks great and fits great awesome!
#35
11 Second Club
iTrader: (12)
Join Date: Oct 2005
Location: Springhill, FL
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Nice build! I'm actually currently building a similar kit from scratch to go on my 03Z
http://forums.corvetteforum.com/c5-f...c76-build.html
Just a heads up. Watch your hood clearance where you were mocking up your catch can and meth pump. The bulkheads for the brackets on the stock hood actually rest down between the radiator and the frame. I ran into an issue when I moved my radiator too far forward and they wouldn't clear.
http://forums.corvetteforum.com/c5-f...c76-build.html
Just a heads up. Watch your hood clearance where you were mocking up your catch can and meth pump. The bulkheads for the brackets on the stock hood actually rest down between the radiator and the frame. I ran into an issue when I moved my radiator too far forward and they wouldn't clear.
Last edited by MawneeC5; 09-27-2013 at 01:03 PM.
#38
Launching!
Thread Starter
iTrader: (21)
Join Date: Jul 2010
Location: california
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
@ ghost-1 which turbo are you using with your kit? The stock tank had to be relocated or buy a tank from canton. A friend of ours made one for us. I do notice the engine coolant temp running a hotter than it did before even with a 160* thermostat.
#39
Nice build!
I will be starting a build thread in the next few weeks when all my parts get in. I have a 99 C5 with:
07 LS2
317 heads
ARP rod bolts and head studs
Little 228 turbo cam
Doing a single PT7675 cea
Turbosmart Raceport BOV and 60mm wastegate
E85
My kit should be coming to the market soon as well : )
I will be starting a build thread in the next few weeks when all my parts get in. I have a 99 C5 with:
07 LS2
317 heads
ARP rod bolts and head studs
Little 228 turbo cam
Doing a single PT7675 cea
Turbosmart Raceport BOV and 60mm wastegate
E85
My kit should be coming to the market soon as well : )