99 SS Camaro 376 LS3 Topend Billet s480 275 Build
03-10-2014, 09:47 PM
#41
No the aei brackets bolt to two bolt holes just below the number two cylinder at the top of the block and the lower bolts to the oil pan/timing cover I think but If I were you, I would just notch the lower passenger side of your motor plate and mount your alternator to it and just space it out how ever much you need
How long till we get to see a video of your car running?
03-10-2014, 10:00 PM
#42
Staging Lane
Thread Starter
iTrader: (13)
Join Date: Dec 2008
Location: Belvidere IL
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
For tension you could either slot one of your mounting holes so it can pivot or you could get a tensioner/idler pulley. As for a vid. of it running I'm hoping this weekend. All that is left to do is vacuum lines which I'm just waiting on the quick connect fittings and then install the gas tank and run the feed and return line
03-25-2014, 01:03 PM
#46
Staging Lane
Thread Starter
iTrader: (13)
Join Date: Dec 2008
Location: Belvidere IL
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
The car is pretty loud but with the 1.32 you can't really here the turbo and the cam is pretty big but it's a 116 lsa so it doesn't sound like it
03-29-2014, 07:53 AM
#47
Staging Lane
Thread Starter
iTrader: (13)
Join Date: Dec 2008
Location: Belvidere IL
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Got the hood back from paint so were hoping to take it down the road today of tomorrow depending on weather. Then next week get the rear gear changed and get it on the dyno
05-03-2014, 07:35 PM
#58
Staging Lane
Thread Starter
iTrader: (13)
Join Date: Dec 2008
Location: Belvidere IL
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
We'll here is the best slip of the day. Still gotta get the 60' figured out had to lift and short shift first cause it was trying to shake the tires. This pass was on 15psi
I'll try to get a video up later
I'll try to get a video up later