RHS build for TT 1K Midengined Kit Car
#141
Video or the shifter in action
#142
#143
9 Second Club
If you've ever heard of Auto Bionics, here in the UK. They seem to offer a load of LS stuff, for mid engine and various transaxles. Whether Porsche or others, and a few DCT transmissions too.
Some very cool stuff, Facebook etc.
Some very cool stuff, Facebook etc.
#144
Spoken to them a few times with my 962 stuff, as they had bought the first Dauer 962 body and parts..... Nice guys to deal with..
#145
Mainly been working on the body for 12 months now but recently have starting to collect the Engine parts needed to start building the Wiring loom...
ID1050X injectors Twin 74mm DBW throttle bodies (Intake hat now to make) all the sensors etc needed and a few extra just so I can see pressure drop and temp drop across the intercoolers etc
Getting excited as this summer should be go for start up.....
Bodywork has been a long process but tooling is now being made so we can make the light weight panels....
Excuse the wood and Foam board I needed a quick fix to see how I liked the look of a Spline down the center of the rear clip... ( Shark Fin I think they call it )
ID1050X injectors Twin 74mm DBW throttle bodies (Intake hat now to make) all the sensors etc needed and a few extra just so I can see pressure drop and temp drop across the intercoolers etc
Getting excited as this summer should be go for start up.....
Bodywork has been a long process but tooling is now being made so we can make the light weight panels....
Excuse the wood and Foam board I needed a quick fix to see how I liked the look of a Spline down the center of the rear clip... ( Shark Fin I think they call it )
The following users liked this post:
TheWrathofDan (09-20-2022)
The following 3 users liked this post by lm1clive:
The following users liked this post:
wretched73 (03-17-2022)
The following users liked this post:
SpraydZ (08-27-2022)
#153
Did originally have throttle bodies bolted direct to the intake but I’ve decided now it’s better to turn them 30° For packaging and a nice straight shot at the MAF sensor will be better … Started machining the first one today..
The following users liked this post:
TheWrathofDan (09-20-2022)