I saw this a while back on here but couldn't find anything. Someone mentioned an IAT sensor that had pipe threads on it, so you could mount it into the inter cooler pipe easier. Does anyone know which vehicle this came from?

Also does it plug into the LS1's stock connector?

 

https://www.google.com/#q=gmc%20syclone%20iat%20sensor

Syclone sensor, and yes it is a direct plug in to the harness.

 

I found one at RPS. wouldn't this be the same sensor ?

http://www.racepartsolutions.com/ind...part-solutions

 

they are all the same sensor holley has one too.

 

87 grand national has that iat sensor you can get it from your local parts store

 

The stock IAT sensor in the LS1 F-body is 3/8" NPT threads. Bought this from summit and welded it in... Worked great and reused my original sensor.

http://www.summitracing.com/parts/sum-220072/overview/

 

I always wondered this. Been using a rubber grommet with the stock sensor(Very Tight seal) which didn't have threads IIRC. Will be picking up a bung and GN IAT sensor.

 

Yes just get the 87 grand national sensor from local parts store

 

http://www.diyautotune.com/catalog/gm-open-element-iat-sensor-with-pigtail-p-62.html

Got mine from here, you can order the bung there too.

 

I've always wondered if it would be possible to have the threaded IAT sensor also output to the temp display in the rear view mirrors that are in some of the GM trucks/SUVs so that I can see real time IAT's just by looking at the mirror. If this is possible, then I would have the possibility to log IAT's and also a real time display of IAT's in the rear view mirror temp display. Anyone ever done this?

 

This is the one I bought.

http://www.summitracing.com/parts/smp-ax1/overview/

 

$20 shipped for the whole setup

http://www.ebay.com/itm/3-8-Female-NPT-Aluminum-Weld-on-Bung-Fitting-Adapter-/171222109867?pt=Race_Car_Parts&hash=item27dda20eab&vxp=mtr
http://www.ebay.com/itm/Delphi-TS10077-Air-Charge-Temperature-Sensor-/131016851261?pt=Motors_Car_Truck_Parts_Accessories&hash=item1e81367f3d&vxp=mtr