redss82

Im running the coolingmist kit with a cm14 nozzle

80lbs injectors with a walbro 400 intank one rated for e85 but I am running 93

running prestone winter washer fluid

Made 638whp threw a th400 with plenty of fuel to grow

Boosted Firehawk

iTrader: (11)

Anyone have a kit in the front bumper

conan

iTrader: (5)

I mounted my kit in the front...

[IMG][/IMG]

[IMG][/IMG]

Boosted Firehawk

iTrader: (11)

Looks badass. I wonder if there will be room to do it with a turbo and stand up radiator with front fans.

Boosted Firehawk

iTrader: (11)

How well does that ebay kit actually work????

3rdgentug

iTrader: (23)

If denmah says it works - its like the holy grail

Boosted Firehawk

iTrader: (11)

No way in hell you can mount that bottle up front on a f body....Unless its smaller than it looks

Detoxx03

iTrader: (14)

Dual 15 nozzle Alky Control system, M1 meth, and 780/660

kelsey_canard

iTrader: (6)

I about to order this kit. Found this in the ad,


"COOLINGMIST STAGE 1 200 psi water/meth kit

This will come with our size 5 injector which will work with most vehicles from 250 to 400 or so HP to the wheels. If you need a larger or smaller injector the ONLY way we can do that is if you put the injector size in the paypal notes field of the paypal payment"

Their webpage says their size cm5 is 5gph. I may ask them to throw in the bigger nozzle lol. Surely you've been spraying more then 5gph.

Boosted Firehawk

iTrader: (11)

Whoa. That has engine disaster all over it

denmah

iTrader: (2)

i dont actually swap out the nozzle, i do 600-800whp with a good majority of these cars on that, if that is what they ship it with haha

denmah

iTrader: (2)

my 9.68@145 was on the same kit, stock bottom end 5.3 and pumpgas + washer fluid

Boosted Firehawk

iTrader: (11)

can that kit be mounted in the engine bay? how big is that bottle?

What washer fluid do u use

Boosted Firehawk

iTrader: (11)

What nozzle is everyone using for 18+ boost

Guard dog

I wouldn't want a BOV after the meth nozzle.

geoff17

Obviosuly, I don't think anyone would.

denmah

iTrader: (2)

i use whatever size jug, bottle, overflow container i need for the methanol, the trunk mount one they sell is really nice also.

i use prestone yellow washer fluid

kelsey_canard

iTrader: (6)

Would you care to check what nozzle you are actually using on one of your setups? I just bought a cooling mist kit of ebay, and requested them to send a cm12 which is 14gph. I'm also very interested in how much you are spraying lol. They said the largest they will even send with their kit is a cm10 which is 12.8gph.

TNTramair

iTrader: (15)

-run a Devils own twin knozzle kit.
-its set up to purge the system at 10psi and go full spray at 15psi.
-have 96lb injectors
-use the stock washer bottle as my meth tank
-use stock GM washer fluid b/c its 100% meth and its cheap
-my car made 770/660 to the wheels but only sees 14psi so it never actually makes it to full spray.

Pocket

iTrader: (22)

What kits are you using on your setup?
Pieced together, mostly devils own stuff, aquatec pump

How much meth do u need for a setup?
I run a 1.25 gal tank, will likely upgrade to a 2-3gal tank in the future

What size injectors with twin pumps
Single pump here, twin #12 nozzles

Do u use meth all the time or only under a certain amount of boost
Hobbs activated at 2psi

What brand of bottle is the safest/best meth to use in the kit
Anything the meth wont eat up. Im using a stock coolant jug. Running 100% meth from the local dragstrip

How much power are u making
625rwhp @ 14psi

This coincides with number 4 but can u tune to run low boost and no meth and have another tune for higher boost and meth?
Yes, use two hobbs switches set to different values. Controllers may do the job but I believe in KISS, and a hobbs activated solenoid is simple, effective and inexpensive