On3 performance 78/76
#341
Launching!
On 3 78/75 here.... 3400 lb camaro with me in it. 6.0 ly6 forged Tsp rods and wiseco pistons. Lifted a ring land on stock parts and have yet to run it withforged stuff.... went 10.71 @ 130 with a spinning 1.71 60ft with stock internals and pump gas. track was **** and was oiled down twice before 60ft mark.... this was on 8-9 psi
#342
10 Second Club
iTrader: (1)
On 3 78/75 here.... 3400 lb camaro with me in it. 6.0 ly6 forged Tsp rods and wiseco pistons. Lifted a ring land on stock parts and have yet to run it withforged stuff.... went 10.71 @ 130 with a spinning 1.71 60ft with stock internals and pump gas. track was **** and was oiled down twice before 60ft mark.... this was on 8-9 psi
#343
On3 78/75, stock L33 5.3l with stock LQ9 6.0l cam, 3600lb Buick Grand National, 4l80e, 3.25 gears ford 9", 1.45 60ft 6.3 at 112.95 mph in the 1/8th off the foot brake. Never ran it in a full 1320. This was at 17 psi, e85, non intercooled, truck intake with water injection.
#345
10 Second Club
iTrader: (1)
On3 78/75, stock L33 5.3l with stock LQ9 6.0l cam, 3600lb Buick Grand National, 4l80e, 3.25 gears ford 9", 1.45 60ft 6.3 at 112.95 mph in the 1/8th off the foot brake. Never ran it in a full 1320. This was at 17 psi, e85, non intercooled, truck intake with water injection.
I'm hitting the dyno Thursday , gonna turn it up to mid20s or so on 116 fuel and see how far this turbo will go
#346
That was all my fuel pump had, its a single Walbro 450. I had it at 19psi on the street and it pulled harder but the afr was getting lean.
#348
This was 93 with a water meth kit, 17.5 lbs , th350 trans BTR stage 2 turbo cam
At this boost the car has went 110mph in the 1/8
put some 116 in it and picked up some power but think this turbo is done on my set up and maxed out my injectors
https://youtu.be/wjAo6Fnn9o4?t=33s
At this boost the car has went 110mph in the 1/8
put some 116 in it and picked up some power but think this turbo is done on my set up and maxed out my injectors
https://youtu.be/wjAo6Fnn9o4?t=33s
#349
10 Second Club
iTrader: (1)
On 20lbs with 116 it made around 720, we went to 22lbs and only picked up around 5 hp. i will say I was at 103% duty cycle on my injectors at 22lbs, so maybe my tuner kept it soft at that power.
car has a th350 with a loose converter and was on a 25 x 10.5 drag radial. So the combo is eating up alot of dyno numbers
#354
TECH Fanatic
iTrader: (8)
is anybody else's on3 7875 as loud as mine? granted i have a full exhaust but when i start spooling the turbo is much louder then i anticipated, you dont hear anything else but spool.... dont get me wrong i love it, i was just curious if this is a notoriously loud turbo?
#355
is anybody else's on3 7875 as loud as mine? granted i have a full exhaust but when i start spooling the turbo is much louder then i anticipated, you dont hear anything else but spool.... dont get me wrong i love it, i was just curious if this is a notoriously loud turbo?