mdtj

iTrader: (2)

What size injectors are you running.

denmah

iTrader: (2)

siemens deka 80s
60psi base pressure
10gallon cell
magnafuel 4303
-10feed

RedRocketZ28

iTrader: (19)

This is still on the LS1 intake as well correct?

This car is impressive as hell.

denmah

iTrader: (2)

yes LS1 intake with a freeze out plug in the EGR hole LOL stock throttle body

RedRocketZ28

iTrader: (19)

Haha that's awesome. I noticed the freeze plug on page 1 and couldn't find a mention of a different intake so I figured it was still the LS1.

denmah

iTrader: (2)

4 inch cx racing intercooler
3 inch china piping

2.5 stainless hotside with truck manifolds
stock 317 heads with ljms cam and Btr springs

Huron Speed

iTrader: (1)

is this running microsquirt matt? I looked through the thread and didn't see it. I think I remember seeing on facebook that it was.

denmah

iTrader: (2)

its running MS3x

denmah

iTrader: (2)

i would love to see it run a micro haha but the car came iwth a ms3x in it, and ive been doing pretty good with it

we are gunna squeeze for 7s and see if we can safely do 7s on pump fuel, that would be full on retarded for a pumpgas car street drive to the track and blow down 7s on a radial and pump fuel

Huron Speed

iTrader: (1)

man ive said it many times before, you guys know your stuff! I wouldnt be surprised at all if you pull it off.

between you, john, and FI, the right group of guys are on it! cant wait to see what happens.

TDagen

7's on pump fuel. I don't even think I have ever heard those two mentioned in the same sentence. GO FOR IT!!!

Can't wait to see what this car and crew does next

LJMSJohn

Limiting factor is going to be the turbine....

he keeps it up.... theres a GT55 I am tempted to tell Matt to go get and throw on this thing just to see if we can get it to go 7's on pump gasoline...

TDagen

Sounds like the big guns might be getting pulled out to make sure this is taken care of, this is getting radical...

1320king

iTrader: (4)

what size / type of drag radials are you guys running again?

mdtj

iTrader: (2)

What head gaskets are you using, and are using any type off sealer on them.

denmah

iTrader: (2)

gen1 295 on the mid to high 8s
and the new mickey pro for the 1.26 60 and lower 8s

it has more in it with the pro for sure, they are awesome

denmah

iTrader: (2)

i believe its LS9 head gaskets right out of the bag, let me ask mark

yenkomike

iTrader: (2)

when will he be raising the bar again?

denmah

iTrader: (2)

it is Ls9 head gaskets, and i think he is gunna race saturday, i have a dyno day that day so i wont be there with him at the track to tweak the tuneup if he goes

but if he gets it hooking i will tell him to splash in some race and turn it up and watch the wideband lol

1320king

iTrader: (4)

awesome! i have 295 gen1 on my car right now and was thinking of the 275 pro. you pretty much solidified my choice.