Prep for procharger?
Thread Starter
TECH Enthusiast
Joined: Jan 2004
Posts: 576
Likes: 0
From: Grandview Missouri
Prep for procharger? I've been kicking around alot of ideas on what to do to my car as of late. The plan I've come up with and keep coming back to time and again is to put a procharger on it. So I figured I would stop by here and see what everyone's experience has been with their superchargers on ls1s. Also if you wouldnt mind what all mods would you suggest for the mean time before I start the big save for the procharger its self. Thanks
my current mods are: several free mods, !cags, lid, cutout, pro 5.0
my current mods are: several free mods, !cags, lid, cutout, pro 5.0
TECH Fanatic
Joined: Dec 2001
Posts: 1,220
Likes: 0
From: Germantown, MD
Long tube headers, good clutch, 12bolt/9inch rear, injecters/fuel pump, and if you think you might be doing your own tuning you might want to get LS1Edit and start familiarizing yourself with it. Obviously this all depends on your goals. But forged internals would also be very valuable for a blown car. This is the way to do it the right way. You don't have to go this far, but you'd have a serious stout setup if you did.
Good luck,
Mike
Good luck,
Mike
Thread Starter
TECH Enthusiast
Joined: Jan 2004
Posts: 576
Likes: 0
From: Grandview Missouri
I was anticipating the rear and clutch but hadnt thought of the fuel pump and injectors. I'm probably going to use raging motorsports for all my tuning. Thanks for your input though looks like you'd be one of the best guys to talk to about it. 
