paging frcefed98
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Trans, you can order it anyplace. I got the same one from a local speed shop. Indy auto parts here in Peabody.
Im doing a clutch tonight so NOYZEE garage will be in full effect if you want to take a ride down to check it out. If you get here befor 7 Indy will be open, some one here can give you a ride over and get you set up. if they have to order it its almost always 1 day away.
I'll PM my adress to you, not sure if i'll be back on today or not.
Im doing a clutch tonight so NOYZEE garage will be in full effect if you want to take a ride down to check it out. If you get here befor 7 Indy will be open, some one here can give you a ride over and get you set up. if they have to order it its almost always 1 day away.
I'll PM my adress to you, not sure if i'll be back on today or not.
Yeah its a russel -8an fuel presure take off fitting or so they call it
I got mine from jegs cause the speedshops here don't carry jack.
PN 799-670350 for the -8an or
PN 799-670340 for the -6an.
They are pretty slick cause they swivel so you can put the sender in any position you want.
Hope this helps and I hope you can find it locally.
Brad, knock one down for me
J
I got mine from jegs cause the speedshops here don't carry jack.
PN 799-670350 for the -8an or
PN 799-670340 for the -6an.
They are pretty slick cause they swivel so you can put the sender in any position you want.
Hope this helps and I hope you can find it locally.
Brad, knock one down for me
J
Thanks
Kevin did an excellent job, got the file loaded up and the car ran like a champ and still does. Kevin still wants to get an a/f graph off a wideband so he can fine tune it even further but the cogs held things up
Now with the SDCE spring tensioner assembly, I hope to be free of the belt problems and the other problems the cogs were creating and get back getting some info for Kevin. I just bought a LM-1 wideband so I can get the a/f info on the road instead of the dyno
Jeremy
Kevin did an excellent job, got the file loaded up and the car ran like a champ and still does. Kevin still wants to get an a/f graph off a wideband so he can fine tune it even further but the cogs held things up
Now with the SDCE spring tensioner assembly, I hope to be free of the belt problems and the other problems the cogs were creating and get back getting some info for Kevin. I just bought a LM-1 wideband so I can get the a/f info on the road instead of the dyno
Jeremy
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
frc, I just got the same thing. Kevin is coming with me this wednesday to track tune with me. It should be good. you send him the info, he will sqeek more out. glad it went well.
Trans, you coming by?
Trans, you coming by?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo 8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
hey, you got plenty of advanced notice, take a ride up. I have a pull out couch, you can bunk at my house, or hell you might see the NOYZEE garage and want to bunk in there! come on up!
we accualy own the house 1 house down from my place, and we are renting it out, its all yours if you want, hell if you need a job, Im always looking for a good guy to come to work for me, you do sheet metal?
we accualy own the house 1 house down from my place, and we are renting it out, its all yours if you want, hell if you need a job, Im always looking for a good guy to come to work for me, you do sheet metal?
No sheet metal experience here, but I can learn right. And yep I need a job as I am jobless right now
I don't mind getting cut up by sheetmetal, my arms/hands are always toast from working on the bird anyway
J
I don't mind getting cut up by sheetmetal, my arms/hands are always toast from working on the bird anyway
J
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Come on up. There are some places to stay around here. you could get a decient little appartment for like 550-650 . As long as your willing to learn and show up on time and reliable then Ill give you a job. We can talk money latter. But theres lots of room for rases with more experiance
Thread Starter
TECH Addict
Joined: Jul 2003
Posts: 2,124
Likes: 0
From: its as intense as the time i forgot how to sit down
he also is a gigalo at night and he is my pimp,it good except when i dont do good he powders the back of his hand and gives me a good ole pimp slap