75 Chevy K10 w/5.3l s475 build thread
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Apr 2008
Location: Graden city, mi
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
75 Chevy K10 w/5.3l s475 build thread
Started on her last night. Not sure how "far" it'll go but for now.
Get the 468 bbc out.
Going with a SBE Alum 5.3l with s475 83mm 1.10t6.
Ls6 intake stock t.b., may go with truck intake,
799 heads stock
btr dual spring with tit retainers.
Stock rockers with truions.
Comp custom cam.
Comp short travel lifters
2.25 divided crossover.
46mm tial gate.
E-85
No intercooler
dirty dingo mounts
Up and forward truck manifolds
400 trans 208 t case
14 bolt rear
10 bolt front, for now, have Dana 60 for it.
4:10 gears
Lockers front and rear
Trucks sittin on 37x12.5x16.5 Goodyear MTR's on Hummer 24 bolt wheels.
Hoping for 700 ftlbs 700 Hp.
Let me know what you think.
Get the 468 bbc out.
Going with a SBE Alum 5.3l with s475 83mm 1.10t6.
Ls6 intake stock t.b., may go with truck intake,
799 heads stock
btr dual spring with tit retainers.
Stock rockers with truions.
Comp custom cam.
Comp short travel lifters
2.25 divided crossover.
46mm tial gate.
E-85
No intercooler
dirty dingo mounts
Up and forward truck manifolds
400 trans 208 t case
14 bolt rear
10 bolt front, for now, have Dana 60 for it.
4:10 gears
Lockers front and rear
Trucks sittin on 37x12.5x16.5 Goodyear MTR's on Hummer 24 bolt wheels.
Hoping for 700 ftlbs 700 Hp.
Let me know what you think.
#7
Maybe with Dana 44s front and rear but i would have to do chromoly axles and limit myself to 35s probably if i wanted it to live at all. that or always keep it on dirt roads
Trending Topics
#11
Launching!
Thread Starter
iTrader: (2)
Join Date: Apr 2008
Location: Graden city, mi
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Got the 2 round pegs in the square holes. Just a little more hammering.
Got the one side all tacked up. One more tube on the other, but I gave up after cutting it too short....
#13
Launching!
Thread Starter
iTrader: (2)
Join Date: Apr 2008
Location: Graden city, mi
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Got the other side ready to weld, just need to get a small piece of 2.5" to finish the double slip.
What size tube should I use for the wastegate merge? 46mm.
Guna merge into one gate.
#15
Launching!
Thread Starter
iTrader: (2)
Join Date: Apr 2008
Location: Graden city, mi
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
even without boost, I'd run that bitch out of gas all the time. It's like 12 miles to the gas station from my house. I'm thinking about selling the bbc and building a 408 w/billet 84 mm for it. I think it will bolt right up. Just change the cold side. But for now I need to finish this up.
Anyone have any idea what size tube I should use for the wastegate? Just going to run one gate, as I'm not worried about low boost. Low to this truck will be 15-18 what ever it takes to make 700 ftlbs. Hehe
Anyone have any idea what size tube I should use for the wastegate? Just going to run one gate, as I'm not worried about low boost. Low to this truck will be 15-18 what ever it takes to make 700 ftlbs. Hehe
#19
Launching!
Thread Starter
iTrader: (2)
Join Date: Apr 2008
Location: Graden city, mi
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know if a f body power steering pump will turn the gear box? I sure I could come up with something to use the one from the truck but damm that thing ugly. Lol
#20
Launching!
Thread Starter
iTrader: (2)
Join Date: Apr 2008
Location: Graden city, mi
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Need to get a better plan for the gate, Going with twin gates.
Thinking about ordering a set of jgs 40mm. I sure that's plenty but figured I ask. Should get back at it Friday. Want to get a bunch of stuff welded up. Letting work get in the way right how. Lol
Thinking about ordering a set of jgs 40mm. I sure that's plenty but figured I ask. Should get back at it Friday. Want to get a bunch of stuff welded up. Letting work get in the way right how. Lol