Forced Induction Superchargers | Turbochargers | Intercoolers

holley hp help

Thread Tools
 
Search this Thread
 
Old 05-05-2015, 09:16 PM
  #1  
Teching In
Thread Starter
 
ts10's Avatar
 
Join Date: Apr 2015
Location: South Dakota
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default holley hp help

I am new to the boosted ls motors and new to the holley hp. here is my set up . I have an 04 lq4 100% stock minus a comp 54-480-11 cam and holley 120lbs injectors. it is a rear mount on3 76mm turbo that is intercooled.I am going to run e85 and up to 15#s but mostly around 7#s of boost I have the gm 12592525 3 bar map sensor, I was wondering how much timing to run as a base tune, and what the target a/f should be.
Old 05-05-2015, 09:24 PM
  #2  
Teching In
Thread Starter
 
ts10's Avatar
 
Join Date: Apr 2015
Location: South Dakota
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default my base spark map and cam size

I am at 1500' elevation



Attached Thumbnails holley hp help-20150505_211138.jpg  
Old 05-06-2015, 01:25 PM
  #3  
Teching In
 
rg913's Avatar
 
Join Date: Dec 2014
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
Default

timing map is probably close for 15#'s conservative for 7. I would make 11.7 your target (gas scale)
Old 05-06-2015, 02:00 PM
  #4  
Teching In
Thread Starter
 
ts10's Avatar
 
Join Date: Apr 2015
Location: South Dakota
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

I will give it a try and see how it runs. We're do you think I should be at with 7#s? Appreciate the advice
Old 05-06-2015, 02:07 PM
  #5  
On The Tree
 
turboventura's Avatar
 
Join Date: May 2012
Posts: 175
Likes: 0
Received 0 Likes on 0 Posts
Default

And just a tip, when making changes on the timing its easier for me to make the adjustments on the small table and when you enable the large table it automatically smooths between.



Quick Reply: holley hp help



All times are GMT -5. The time now is 03:01 AM.