Is this cam ok for boost?
Thread Starter
Staging Lane
Joined: Jan 2015
Posts: 89
Likes: 0
From: Atoka, Ok
Is this cam ok for boost? I have a cammed 5.3 that was not going to be turbo'd........well I have now decided to do twins and was wondering if the cam that I already installed would still work. It is a 228r
228/228 .588/.588 112 lsa.
Twin 61mm on3 turbos
228/228 .588/.588 112 lsa.
Twin 61mm on3 turbos
Little tight on the lsa but should be fine..
Trending Topics
I was in the same situation recently. I've got a n/a cam installed already and was wondering if i should spring for a turbo grind. I was told it will be ok to run tho. It's a old thunder racing cam 220/220 553/553 114lsa for a twin turbo 5.3.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
